[Asterisk-Users] TDMOE Badness in kernel...

pbx at itsngroup.com pbx at itsngroup.com
Wed Oct 5 14:02:05 MST 2005


Right... I had seen the multiple issues, on the flip side, the only
solution was NOT to use Kernel 2.6.+...

So... I'm happy that the behaviour is reproduceable (from what I have seen
from my steps, to that of others, and other Distros..)

Anyone out there have the magic wand to make it work with 2.6.+?

Thanks..


> I'm seeing the same behavior on a Debian system with 2.6.12.
> I have two systems with Digium Quad T1s in each and I trunk them with
> TDMoE....This always worked great on 2.4 and up to 2.6.8 but beyond that
> it either spits out copious amounts of kernel badness and paralyzes the
> system completely or gives the same results as you mentioned with
> constant Alarms/Alarm Clears.
>
> I've mentioned it on this forum before as well.
>
> On Wed, 2005-10-05 at 09:49 -0700, pbx at itsngroup.com wrote:
>> Has anyone succesfully used TDMoE on Fedora Core 2.6.12+ Kernel
>> versions?
>>
>> I'm having the issue that is in the Mantis bug database with badness
>> with
>> the kernel.
>>
>> My Story:
>>
>> I can get the dynamic span to come up and show OK in the zttool on both
>> machines. However i get errors every second (Warning: detected alarm on
>> channel 1... then channel 2...)
>>
>> And then the next second, i get : alarm cleared on channel 1,... channel
>> 2... etc...
>>
>> No call will go through across the link becuase of the alarms.
>>
>> It looks as if 2.4 Kernel works, but it would be a lot of work to go
>> back
>> in time.
>>
>> Can anyone give me some direction on this.
>>
>> I have setup IAX2 between the two machines, but I would like the ability
>> to use Dial(Zap/group number/Exten)....
>>
>> I havent found a solution in reading through the wiki's about doing
>> something similar with IAX.. i.e (Dial/IAX2/group number/$exten)...
>> There
>> are some scripts and macros that require you to code variables and check
>> status of each trunk etc.... but it would be nice to use a group with
>> IAX,
>> and in the IAX.conf place iax in groups... (unless i just havent' found
>> it)...
>>
>> Help?
>>
>>
>> _______________________________________________
>> --Bandwidth and Colocation sponsored by Easynews.com --
>>
>> Asterisk-Users mailing list
>> Asterisk-Users at lists.digium.com
>> http://lists.digium.com/mailman/listinfo/asterisk-users
>> To UNSUBSCRIBE or update options visit:
>>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
> _______________________________________________
> --Bandwidth and Colocation sponsored by Easynews.com --
>
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>





More information about the asterisk-users mailing list