[Asterisk-Users] Asterisk 1.0.8 and TDM stop acking inbound calls?

[Patrick Friedel]

Rich Adamson wrote:

>>My office has been running Asterisk 1.0.8 and a TDM04B for a few months 
>>now without too much trouble.  After a while we discovered that after a 
>>certain period (about a month), asterisk stopped acknowledging inbound 
>>calls.  Since I was out of the office the first time it happened, 
>>another admin rebooted the whole box which solved the problem.  The 
>>second time it happened I discovered that just restarting gracefully 
>>solved the problem, so I put that into my cron and forgot about it.  (I 
>>know, it's not "right", but debugging something that happens 
>>unpredictably once a month could go on for way too long to be acceptable..)
>>    
>>
>Check the revision of the TDM card. If rev E/F, call digium support to
>get it replaced. Known problem with early versions of the card.
>  
>
  The rev is labelled on the itty bitty xilinx chip and not under the 
modules, right?  Dang, rev F.  Okiedoke, off to digium I go.  Thanks!