[Asterisk-Users] Static on inside end of conversation

[Jeff Busch]

You are correct.  Inside means the IP Network and Outside means the PSTN
accessible via the Audiocodes MP-108 gateway.

No QoS.

Thanks - Jeff

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Steve
Blair
Sent: Tuesday, November 29, 2005 4:20 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] Static on inside end of conversation



Jeff Busch wrote:

>Hello,
>
>I am running the following configuration:
>
>2.8ghz P4 with 1GB of RAM
>Audiocodes MP-108 connected to 5 POTS lines Polycom IP-500 phones 
>Asterisk at Home 1.3 (this is Asterisk 1.0.9)
>
>End users are complaining of an echo and static on the inside end (the 
>internal side), but the outside end of the conversation doeesn't notice

>anything.
>
>  
>
I'm assuming inside means on the IP network and outside means on the
PSTN which is accessible via a gateway is this correct? If so do you
have QoS enabled on the inside?

>Does anyone have any suggestions on troubleshooting / fixing this 
>problem?
>
>Thanks!
>
>Jeff
>
>
>
>_______________________________________________
>--Bandwidth and Colocation provided by Easynews.com --
>
>Asterisk-Users mailing list
>To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>  
>
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users