[Asterisk-Users] configure intel modems.....

Kerry Garrison support at techdatapros.com
Sat Nov 26 01:51:41 MST 2005


Ust go to eBay and find an X100P card. I usually pay $6.95 and usually buy
two at a time if they will ship them together so with shipping it will run
about $10-$12 each. If that will break the budget, I don't know if these is
a better solution. 

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Phil Pritchard
Sent: Saturday, November 26, 2005 12:30 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] configure intel modems.....

thanks Mark,
     your right i have been getting confused between office and
station(given myself an uppercut and a slap to the back of the head), thats
sort of what im after, but does not really give any quick fix or details for
config files for making asterisk use this card.
     i am a new player to asterisk and have it connected to fwd and a few
soft phones.
because i am tight( well, just dont have the money ) i have to try one of
these cheap cards to connect to a panasonic phone system.
i have one of these modems and thought i would give it a go. there is plenty
of info about for connecting to Digium cards but have not seen/found
anything useful, re: the intel voice modems.

    i can surface mount solder but without knowing what components are what
i dont want to remove anything, there are no markings on the board for the
components, well not enough anyway.( eg. R13 and R19) so that sort of stumps
that!

    originally i had 2 cards in there but the second card did funny things
to the server... ie.
- soft phones would half login, i can make calls but cannot receive. the
logs for the soft phone said something about sip protocol error, although
the voice quality was fine and both ways.
- there was no music on hold at all.

i have removed the second card and server back to normal, only still no pots
line.

i have tried to config modem on what i have found on the net but its still
not working, the modem is there and working.
lsmod says the module(zapa..) is loaded but not used.

the machine is an old dell power edge, without usb....  i read some thing
about asterisk needing the usb for something internal is this true,  will i
have to change the hardware or add a usb card.......

thanks again Mark



Phil



Mark Edwards wrote:

>Phil.
>
>You won't have much luck achieving this. The closest you will be able 
>to get is to set the intel voice modem up as an FXO port. Was this what 
>you meant?
>If so, take a look on the voip-info.org site as there is a page there 
>that will point you in the right direction.
>
>http://www.voip-info.org/wiki/view/X100P+clone
>
>regards,
>
>Mark.
>
>
>-----Original Message-----
>From: Phil Pritchard [mailto:phil at pritchard.asn.au]
>Sent: Saturday, 26 November 2005 5:11 PM
>To: Asterisk-Users at lists.digium.com
>Subject: [Asterisk-Users] configure intel modems.....
>
>can somebody help or point in the right direction.
> where i might be able to find info re: setting up intel voice modems 
>as
>
>fxs ports..
>
>thanks in advance.....
>
>
>Phil
>_______________________________________________
>--Bandwidth and Colocation provided by Easynews.com --
>
>Asterisk-Users mailing list
>To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>_______________________________________________
>--Bandwidth and Colocation provided by Easynews.com --
>
>Asterisk-Users mailing list
>To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>  
>

_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users





More information about the asterisk-users mailing list