[Asterisk-Users] Multiple HFC-PCI cards in mixed modes (TE+NT) won't work!...

[Tzafrir Cohen]

On Thu, Nov 24, 2005 at 10:16:40PM +0100, Francesco Peeters wrote:
> On Thu, November 24, 2005 20:09, Francesco Peeters said:
> > On Wed, November 23, 2005 20:29, Francesco Peeters said:
> <SNIP>
> >
> > Just made myself a crossed NT1 connection to the NT mode card (as
> > described on the PBX4linux site) and connected my phone.
> >
> > The zaphfc driver shows that layer 1 is activated (G3) once the phone is
> > connected, but that is where it stops, as anything above that should be
> > handled in chan_zap.
> >
> > However when I leave the card in bri_cpe_ptmp in zapata.conf, the layer2+
> > protocols are not correct (TE mode) and when I put in bri_net_ptmp, the
> > chan_zap somehow doesn't complete loading or exits in an unexpected
> > manner, resulting in a situation where Asterisk stops loading it's
> > configs, and thus runs without a dialplan and other modules...
> >
> > Seems to me there's an issue in that area: chan_zap, maybe libpri, etc.

So what do you have in zapata.conf?

> >
> 
> I keep replying to myself...  ;-)
> 
> Some extra info:
> /proc/zaptel/*:
> Span 1: ZTHFC1 "HFC-S PCI A ISDN card 0 [TE] layer 1 ACTIVATED (F7)" AMI/CCS
> 
>            1 ZTHFC1/0/1 Clear (In use)
>            2 ZTHFC1/0/2 Clear (In use)
>            3 ZTHFC1/0/3 HDLCFCS (In use)
> Span 2: ZTHFC2 "HFC-S PCI A ISDN card 1 [NT] layer 1 ACTIVATED (G3)" AMI/CCS
> 
>            4 ZTHFC2/0/1 Clear (In use)
>            5 ZTHFC2/0/2 Clear (In use)
>            6 ZTHFC2/0/3 HDLCFCS (In use)
> 
> /proc/pci:
>   Bus  0, device   7, function  2:
>     USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 1).
>       IRQ 11.
>       Master Capable.  Latency=32.
>       I/O at 0xc000 [0xc01f].
>   Bus  0, device   9, function  0:
>     Network controller: Cologne Chip Designs GmbH ISDN network controller
> [HFC-P
> CI] (rev 2).
>       IRQ 11.
>       Master Capable.  Latency=16.  Max Lat=16.
>       I/O at 0xc400 [0xc407].
>       Non-prefetchable 32 bit memory at 0xe3001000 [0xe30010ff].
>   Bus  0, device  17, function  0:
>     Network controller: Cologne Chip Designs GmbH ISDN network controller
> [HFC-P
> CI] (#2) (rev 2).
>       IRQ 11.
>       Master Capable.  Latency=16.  Max Lat=16.
>       I/O at 0xcc00 [0xcc07].
>       Non-prefetchable 32 bit memory at 0xe3002000 [0xe30020ff].
> 
> I have tried all I can to assign different IRQ's to the HFC-PCI cards, but
> they *always* take IRQ 11  :-(
> 
> -- 
> Francesco Peeters
> ----
> GPG Key = AA69 E7C6 1D8A F148 160C  D5C4 9943 6E38 D5E3 7704
> If your program doesn't recognize my signature, please visit
> http://www.CAcert.org/index.php?id=3 to retrieve the Root CA certificate.
> _______________________________________________
> --Bandwidth and Colocation sponsored by Easynews.com --
> 
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users

-- 
Tzafrir Cohen         | tzafrir at jbr.cohens.org.il | VIM is
http://tzafrir.org.il |                           | a Mutt's  
tzafrir at cohens.org.il |                           |  best
ICQ# 16849755         |                           | friend