[Asterisk-Users] Asterisk 1.0/1.2 on cobalt Raq2-4

Jonathan k. Creasy jonathan at bluegrass.net
Mon Nov 21 16:26:14 MST 2005


I've thought about doing that as I have a few spare also. I would use
the raq4 I think. 

Let me know if you have any trouble with it.

-Jonathan

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of bram
kortleven
Sent: Monday, November 14, 2005 5:14 PM
To: asterisk-users at lists.digium.com
Subject: [Asterisk-Users] Asterisk 1.0/1.2 on cobalt Raq2-4

Anyone ever tried to install on a Cobalt Raq device? This is a 1U 19"
rack computer, the Raq2 using a Mips processor, the Raq4 using a K6-2/3
processor.

As I do have a few of these as spares, I was wondering if I could use
them as my pbx system,  because of their low power-system and dence
system box.

I simply need the pbx to serve 2 phones in my appartment, a SIP-
connection for 4 external internet devices (my brother, living in the
USA, my parents, living a few miles from here, and my nefew living in
France and his mother, living here in Belgium too)

Has anyone done this setup on a Raq2? Or do I need to use the extra
power of the Raq4 (faster cpu and mem, bigger faster disk, ...)

Anyone having a pkg-installer for the raq devices, as they are used for
updates etc...?

Thanks

Bram
_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com --

Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users



More information about the asterisk-users mailing list