[Asterisk-Users] Max number of Digium cards a server can support?

[janvb at caselaboratories.com]

My understanding is that this should work as long as you load the 
modules correctly. I will be interested in your results.

Jan
Juan Manuel Coronado Z. wrote:

>Hi everyone,
>
>I would like to know who of you out there have more than 3 Digium
>wildcards working on the same server, and have no problems related with
>shared IRQs, voice quality, * crashes, etc. Besides wich server (model
>and trademark) are you using and under wich Linux distro.
>
>I have a stock of 2 TE210P and four 2 TE110P wich I have to place on a
>sole server (probably a HP Proliant ML350 with PIV or Xeon and 512MB RAM).
>
>The 2 TE210P have been working several months on a Sun Fire V20z
>(Opteron at 1.8 Ghz and 1GB RAM) and 1 TE110P on an IBM xseries220
>(PIII  at 1Ghz and 1GB RAM) without trouble, but due to a move of
>equipments inside the company and the restricted budget, I'll have to
>place all telephony cards in only one server (and this system will
>support 5 PRI and 1 Rhino ChannelBank through the 6 ports provided by
>the 2 TE210P + 2 TE110P cards).
>
>Any opinion, answer or advice would be appreciated.
>
>
>Regards,
>
>Juan M. Coronado Z.
>
>_______________________________________________
>--Bandwidth and Colocation sponsored by Easynews.com --
>
>Asterisk-Users mailing list
>Asterisk-Users at lists.digium.com
>http://lists.digium.com/mailman/listinfo/asterisk-users
>To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>
>  
>