[Asterisk-Users] Asterisk overlap dialing (PRI)

[Miloš Kocbek]

overlapdial setting should work but you also have to set immediate=no
if you want overlapdial to work

greetings
mk

2005/11/13, Piotr Dydycz <dydyczp at gmail.com>:
> I would like to ask you a question releted to Asterisk and libpri. I
> was trying to find solution in internet but it failed. I have some
> computers with  Digium T1/E1 cards connected to terminating PBX's. In
> most cases everything is allright and i can place calls to PSTN. But
> there are PBX's such configured that they couldn't receive whole
> number in SETUP message. They need to receive CPB digit by digit in
> INFORMATION messeges. AFAIK it is called "overlap". Can
> Asterisk/libpri can overlapdial such a PBX. I was trying to set
> overlapdial=yes in zapata.conf but it didn't help. Is it possible to
> overlapdial on pri interface? If so, It will be very nice if you tell
> me how to configure it because it seems to be poor documented. I'm in
> Europe/Poland, using E1, was trying different versions of
> asterisk/zaptel/libri. Sorry for bad english and looking forward to
> see your reply. Thanks a lot.
>
> --
> Piotr
> _______________________________________________
> --Bandwidth and Colocation sponsored by Easynews.com --
>
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>