[Asterisk-Users] debian sarge & zaptel 1.2 & TDM400P

[Tzafrir Cohen]

On Sat, Nov 12, 2005 at 03:35:43PM +0800, Dulmandakh Sukhbaatar wrote:
> I run debian sarge with kernel-image-2.6.8-2-686, compiled and installed 
> zaptel 1.2rc2 without any problem. Modules can be loaded without 
> problem. Also I have TDM04M or TDM card with 4 FXO modules.
> 
> /etc/zaptel.conf contains, as mentioned in Asterisk. The Future of 
> telephony:
> fxsks=1-4
> loadzone=us
> defaultzone=us
> 
> ztcfg -vv shows me:
> Zaptel Configuration
> ======================
> 
> 
> Channel map:
> 
> Channel 01: FXS Kewlstart (Default) (Slaves: 01)
> Channel 02: FXS Kewlstart (Default) (Slaves: 02)
> Channel 03: FXS Kewlstart (Default) (Slaves: 03)
> Channel 04: FXS Kewlstart (Default) (Slaves: 04)
> 
> 4 channels configured.
> 
> And connected my phone line to the TDM card, of cource RJ45.
> 
> In Asterisk book:
> Now that the FXO channel is configured, let’s test it. Run the zttool 
> application and
> connect your PSTN line to the FXO port on your TDM400P. Once you have a 
> phone
> line connected to your FXO port, you can watch the card come out of a 
> RED alarm.
> 
> But nothing becomes red. Any suggestions? Please help and sorry for my 
> poor english.

Hmmm... Any problems? Anything not working? Can you dial through the FXO
line from Asterisk?

-- 
Tzafrir Cohen         | tzafrir at jbr.cohens.org.il | VIM is
http://tzafrir.org.il |                           | a Mutt's  
tzafrir at cohens.org.il |                           |  best
ICQ# 16849755         |                           | friend