[Asterisk-Users] 403 Forbidden

[Tim Quinton]

Hi - I'm new to Asterisk and I've got asterisk@ home running with a TDM12B with Grandstream 2000 phones.

I can login to the phones using the browser, login to the AMP, but I can't make any calls either internal or external, via softphone or Grandstream.  I get an error 403 Forbidden in the soft phone. The Grandstream gives a busy signal and 503 error or 403 on line3.

The calls are being logged in the AMP as NO ANSWER.

I just sent this in to Digium, but I don't think it's a related issue.

Thanks for any ideas - Tim

eMail to Digium:
I'm getting an error that indicates 1 of my 3 cards on the TDM12B is not working.  I bought it from Digium Canada.

 -- DID YOU REMEMBER TO PLUG IN THE HD POWER CABLE TO THE TDM400P??
Unable to do INITIAL ProSLIC powerup on module 0
ProSLIC on module 0 failed to powerup within 510 ms (0 mV only)

 -- DID YOU REMEMBER TO PLUG IN THE HD POWER CABLE TO THE TDM400P??
Unable to do INITIAL ProSLIC powerup on module 0
Module 0: FAILED FXS (FCC)
Module 1: Not installed
Module 2: Installed -- AUTO FXO (FCC mode)
Module 3: Installed -- AUTO FXO (FCC mode)
Found a Wildcard TDM: Wildcard TDM400P REV I (2 modules)
Registered tone zone 0 (United States / North America)
usb.c: registered new driver wcusb
Wildcard USB FXS Interface driver registered
Registered tone zone 0 (United States / North America)
Registered tone zone 0 (United States / North America)
ip_tables: (C) 2000-2002 Netfilter core team
sis900.c: v1.08.06 9/24/2002
divert: allocating divert_blk for eth0
eth0: Realtek RTL8201 PHY transceiver found at address 1.
eth0: Using transceiver found at address 1 as default
eth0: SiS 900 PCI Fast Ethernet at 0x8800, IRQ 9, 00:0c:6e:0d:1e:10.
ip_tables: (C) 2000-2002 Netfilter core team
eth0: Media Link On 100mbps full-duplex
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport0: irq 7 detected
lp0: using parport0 (polling).
lp0: console ready
usb.c: registered new driver serial
usbserial.c: USB Serial support registered for Generic
usbserial.c: USB Serial Driver core v1.4
audit subsystem ver 0.1 initialized


lspci

00:00.0 Host bridge: Silicon Integrated Systems [SiS] 651 Host (rev 02)
00:01.0 PCI bridge: Silicon Integrated Systems [SiS] Virtual PCI-to-PCI bridge (AGP)
00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS962 [MuTIOL Media IO] (rev 25)
00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE]
00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] Sound Controller (rev a0)
00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f)
00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f)
00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller
00:04.0 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 PCI Fast Ethernet (rev 91)
00:0e.0 Network controller: Unknown device e159:0001
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon RV250 If [Radeon 9000] (rev 01)
01:00.1 Display controller: ATI Technologies Inc Radeon RV250 [Radeon 9000] (Secondary) (rev 01)
[