[Asterisk-Users] rxfax(spandsp-0.0.2pre18) and HT488

[Steve Underwood]

Hi Zen,

See http://www.soft-switch.org/foip.html

Steve


Zen Kato wrote:

>After I did rxfax(...|debug), I got the followings;
>......(snip).......
>  
>
>>>>DIS: 80 00 ce f4 80 80 81 80 80 80 18
>>>>        
>>>>
>HDLC underflow in state 9
>Changed from phase 4 to 3
>T4 timeout in state 9
>Changed from phase 3 to 4
>DIS:
>  Prefer 256 octet blocks
>  Can receive fax
>  Supported data signalling rates: V.27ter and V.29
>  R8x7.7lines/mm and/or 200x200pels/25.4mm
>  2D coding
>  Scan line length: 215mm
>  Recording length: Unlimited
>  Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85
>  R8x15.4lines/mm
>  Minimum scan line time for higher resolutions: T15.4 = T7.7
>  North American Letter (215.9mm x 279.4mm)
>  North American Legal (215.9mm x 355.6mm)
>  
>
>>>>DIS: 80 00 ce f4 80 80 81 80 80 80 18
>>>>        
>>>>
>HDLC underflow in state 9
>Changed from phase 4 to 3
>T2 timeout
>Start receiving document
>Changed from phase 3 to 4
>DIS:
>  Prefer 256 octet blocks
>  Can receive fax
>  Supported data signalling rates: V.27ter and V.29
>  R8x7.7lines/mm and/or 200x200pels/25.4mm
>  2D coding
>  Scan line length: 215mm
>  Recording length: Unlimited
>  Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85
>  R8x15.4lines/mm
>  Minimum scan line time for higher resolutions: T15.4 = T7.7
>  North American Letter (215.9mm x 279.4mm)
>  North American Legal (215.9mm x 355.6mm)
>  
>
>>>>DIS: 80 00 ce f4 80 80 81 80 80 80 18
>>>>        
>>>>
>......(snip).......
>
>Does HT488 version-1.0.1.2 work OK?
>
>Zen
>_______________________________________________
>Asterisk-Users mailing list
>Asterisk-Users at lists.digium.com
>http://lists.digium.com/mailman/listinfo/asterisk-users
>To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
>  
>