[Asterisk-Users] rxfax(spandsp-0.0.2pre18) and HT488

[Zen Kato]

After I did rxfax(...|debug), I got the followings;
......(snip).......
>>> DIS: 80 00 ce f4 80 80 81 80 80 80 18
HDLC underflow in state 9
Changed from phase 4 to 3
T4 timeout in state 9
Changed from phase 3 to 4
DIS:
  Prefer 256 octet blocks
  Can receive fax
  Supported data signalling rates: V.27ter and V.29
  R8x7.7lines/mm and/or 200x200pels/25.4mm
  2D coding
  Scan line length: 215mm
  Recording length: Unlimited
  Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85
  R8x15.4lines/mm
  Minimum scan line time for higher resolutions: T15.4 = T7.7
  North American Letter (215.9mm x 279.4mm)
  North American Legal (215.9mm x 355.6mm)
>>> DIS: 80 00 ce f4 80 80 81 80 80 80 18
HDLC underflow in state 9
Changed from phase 4 to 3
T2 timeout
Start receiving document
Changed from phase 3 to 4
DIS:
  Prefer 256 octet blocks
  Can receive fax
  Supported data signalling rates: V.27ter and V.29
  R8x7.7lines/mm and/or 200x200pels/25.4mm
  2D coding
  Scan line length: 215mm
  Recording length: Unlimited
  Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85
  R8x15.4lines/mm
  Minimum scan line time for higher resolutions: T15.4 = T7.7
  North American Letter (215.9mm x 279.4mm)
  North American Legal (215.9mm x 355.6mm)
>>> DIS: 80 00 ce f4 80 80 81 80 80 80 18
......(snip).......

Does HT488 version-1.0.1.2 work OK?

Zen