[Asterisk-Users] Asterisk - fax - spandsp

[Steve Underwood]

Jean-Yves Avenard wrote:

> Hello
>
> On 15/05/2005, at 4:40 PM, Steve Underwood wrote:
>
>>> span=1,1,0,ccs,hdb3,crc4
>>>
>>>
>>
>> The second parameter now says "treat this E1 as the first priority as 
>> the clock source". Your box should lock itself to the PSTN's clock. 
>> If that makes no sense, the bottom line is "this is good". :-)
>>
>>
>
> Hum.. an interesting side effect to using the E1 as a primary clock 
> source, is that I can't remove the wcte11xp kernel module anymore...
>
> it hangs the machine if I do so. Any ideas on how to do that?

I don't get that with a TE410P. What happens if you disconnect the cable 
first, so your box cannot sync to the port, and no longer treats the far 
end as the clock master? Can you remove the module like that? Whatever, 
it is a bug, and should be reported.

Regards,
Steve