[Asterisk-Users] wctdm fxs ring frequency

[Robert Webb]

> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-
> bounces at lists.digium.com] On Behalf Of Lyle Giese
> Sent: Sunday, March 20, 2005 11:25 AM
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: Re: [Asterisk-Users] wctdm fxs ring frequency
> 
> Robert Webb wrote:
> 
> >Good morning all,
> >
> >  I have been trying to research of to change the ring frequency for
the
> >TDM400 FXS port. I have several newer phones that will start to ring
and
> >then quit intermittently. I have tried boosting the voltage using
> >boostringer=1 and that has not helped. I did verify in dmesg that the
> >boostrinringer option in loading.
> >
> >  I have searched the list and the wiki and have seen references to
> >changing this in the wcfxs.c file but I am not using that. Likewise,
I
> >have not founf anything in by looking into the wctdm.c file. I am no
> >programmer but can somewhat follow the code.
> >
> >  Can someone just point me in the right direction?? Even if it just
a
> >place that describes how to change this. I have a feeling this is the
> >problem with my phones.
> >
> >Robert
> >
> >

<snip garbage>

> >
> Or did you forget to plug in the extra power on the card?
> 
> This card requires more power than the card slot can give it and you
> need to plug in a molex power connector to the end of the card.
> 
> Lyle
> 


<snip list footer>

Yes, I forgot to add that little detail. The card has the power from the
system power supply plugged into it. And the power supply is a 500 watt
that is running a single PIII 933mhz with a single hard drive. 

Robert