[Asterisk-Users] DVG-1120 questions

[Ryan Laginski]

Hi,
I'm able to see the callerid number, but not the name. I've tried your
suggestion by removing the quotes, but it doesn't help. Any
suggestions?
Thanks,
-Ryan


On Fri, 11 Mar 2005 17:53:17 -0600, Eric Wieling <eric at fnords.org> wrote:
> lists at spirestudios.com wrote:
> 
> > I upgraded a DVG-1120M to a DVG-1120S.  Everything works great, but I'm
> > having some caller ID issues on incoming calls sent to the SIP device.
> > Using debug on the device, the caller ID looks fine - just as I set it in
> > Asterisk.  However, the phone is showing "CID TRANSMISSION ERROR".  Should
> > I check the RX and TX gain levels?  Try another phone?  Any ideas would be
> > much appreciated.
> 
> Make you don't have quotes in your CallerID string.
> 
> callerid=Robert Dobbs <667>
> 
> rather than
> 
> callerid="Robert Dobbs" <667>
> 
> --
> Always do right. This will gratify some people and astonish the rest.
> Mark Twain
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>