[Asterisk-Users] FXO module in TDM400P (UK, BT) - Hangup detection failing

[Soner Tari]

If your problem is the same as mine then you need to use busydetect. In 
Turkey, we don't have polarity reversal, and signalling tones are quite 
different.

But just enabling busydetect in zaptel.conf did not help me, it may work for 
you though. I had to change relevant compile options and some settings in 
dsp.c file and recompile. (The goal is to detect congestion tone here.) I 
haven't noticed any problems so far, but I am still working on it to use 
Martin's algorithm instead.

Hope this helps,
Soner

----- Original Message ----- 
From: Cameron Beattie
To: asterisk-users at lists.digium.com
Sent: Monday, March 07, 2005 1:31 AM
Subject: [Asterisk-Users] FXO module in TDM400P (UK,BT) - Hangup detection 
failing


I am based in New Zealand and am experiencing the same problem as referred 
to in the post "FXO module in TDM400P (UK, BT) - Hangup detection failing" 
from 2 November 2004 i.e. Zap/4 (being the FXO module) not detecting hangup 
on the PSTN line if the call is not answered on a PABX extension.



Has anyone managed to find a resolution to the problem?



For information:

Digium TDM400P with FXS on Zap 1 & 2 and FXO on Zap 3 & 4.

CVS-v1-0-01/24/05

Using fxs_ks signalling



Regards



Cameron



--------------------------------------------------------------------------------


_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050307/03cecf55/attachment.htm