[Asterisk-Users] "No compatible codecs!" -- worked with 1.0.0, not 1.0.6 or CVS.

[Eric Wieling]

Ken D'Ambrosio wrote:

> Okay, I'm terribly confused.  If I build and run Asterisk with the 1.0.0 
> sources that I downloaded from Digium, my Polycom 300 works just fine.  
> If I build with either various CVS builds, or the 1.0.6 sources from 
> Digium, I get "No compatible codecs!".
> 
> WTF?
> 
> I'm using -the exact same- config files for both; I've tried 
> enabling/disabling ULAW, ALAW and G279 on the Soundpoint, to no avail.  
> Plug 1.0.0 back in -- works like a champ.
> 
> To say that I'm confused would be understating things rather severely.

disallow=all and allow=ulaw in sip.conf.  Do NOT allow= anything else 
and do NOT use bandwidth=

--Eric