[Asterisk-Users] accountcode not present in cdr

[Andres]

Max Clark wrote:

> Hi all,
>
> I have what I hope will be a simple problem. In my sip.conf I have 
> defined the accountcode field (see below), and they system does not 
> report any errors when I reload the configuration. However when I look 
> at my cdr detail (either the csv on disk, or the mysql info) the 
> accountcode that I have specified is missing. I have scoured the list 
> and have seen a few postings on this with no solutions. What should I 
> be looking at to debug this.
>
> Thanks in advance,
> Max

Setting the accountcode in sip.conf is totally unreliable.  It does not 
work in many cases.  Your best bet is to set it in a context via the 
command:
SetAccount([account]):  Set  the  channel account code for billing

>
> I am running Asterisk 1.0.7 on CentOS 4.0:
> Linux 2.6.9-11.EL #1 Wed Jun 8 16:59:52 CDT 2005 i686 i686 i386 GNU/Linux
>
> [provider1]
> accountcode=provider1
> type=friend
> host=10.1.1.1
> dtmfmode=rfc2833
> username=user
> secret=12345
> qualify=no
> canreinvite=no
> insecure=very
> disallow=all
> allow=ulaw
> allow=gsm
>
> [provider2]
> type=peer
> accountcode=provider2
> secret=54321
> username=user
> host=10.1.1.10
> dtmfmode=rfc2833
>
>
>

-- 
Andres
Network Admin
http://www.telesip.net