[Asterisk-Users] Nasty little incident ...

[Asterisk]

I checked today : span 1 is *definately* connected to the pstn, as is 
span 3. spans 2 and 4 are connected to the meridian.

my sync is on span 1 (primary) and 3 (secondary) as defined in the 
zaptel.conf

span=1,1,0,ccs,hdb3,crc4
bchan=1-15,17-31
dchan=16

span=2,0,0,ccs,hdb3,crc4
bchan=32-46,48-62
dchan=47

span=3,2,0,ccs,hdb3,crc4
bchan=63-77,79-93
dchan=78

span=4,0,0,ccs,hdb3,crc4
bchan=94-108,110-124
dchan=109

Now, I *know* that span 3 is connected to the pstn, because zapata.conf is

context=isdn32-b
;pridialplan=unknown
prilocaldialplan=national
internationalprefix = 00
nationalprefix = 0
localprefix = 01702
group=1
signalling=pri_cpe
switchtype=euroisdn
channel=1-15,17-31

context=meridian-b
group=2
signalling=pri_net
switchtype=euroisdn
channel=32-46,48-62

context=isdn32-a
pridialplan=unknown
group=3
signalling=pri_cpe
switchtype=euroisdn
channel=63-77,79-93

context=meridian-a
group=4
signalling=pri_net
switchtype=euroisdn
channel=94-108,110-124

My dialplan uses exten => s,12,Dial(Zap/r3/${ARG1},120)

and I get a call on an outside line

I'm now not only worried but really confused :(

Thanks for all the help and responses though - it all adds up to 
information that can help now and in the future.

Julian.


steve at daviesfam.org wrote:
> 
> On Thu, 16 Jun 2005, Rich Adamson wrote:
> 
> 
>>The E1 card does not receive "clocking" from any span. It "sync's"
>>the on-board clock to whatever span you choose. If you watch what
>>others have posted on the list over many months, you'll notice many
>>have never specified a clock sync source. The problem they have is
>>typically associated with clicking and other audio distortion; not
>>a total failure.
>>
> 
> 
> Thanks for the correction - by "getting clocking" I didn't mean anything 
> more than syncing clock.
> 
> Nevertheless, I have had customers, though, with "dead"  TE410P setups - 
> exactly this person's symptoms.  The cause was having a span selected as 
> the "sync" span but having nothing connected to that port.  Adjust 
> zaptel.conf so that span is not a sync source ("0" in position 2) and the 
> board starts to work.
> 
> Steve
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
> 
>