[Asterisk-Users] DMS-500 CID name not in CDR

[David Boyd]

What code set is the 500 PRI configured for?

Dave

On Fri, 2005-06-10 at 17:05 -0400, jr.richardson at cox.net wrote:
> Hi Guys,
> 
> I have several * servers connected to T1 PRI's from various service providers in multiple locations the US.  All the * servers use the same hardware with the same OS and * version.  When connected to 5ESS Switches, using the NI2 (national) PRI protocol, the CID name and number come across fine and populate into the * CDR fine.  I connected to a DMS-500, NI2 (national) protocol and the CID name doesn't get populated in the * CDR.  The only variance in the PRI debug outputs is this, from the DMS switch:
> 
> Jun  9 16:41:15 WARNING[30369]: chan_zap.c:7133 zt_pri_error: PRI: !! Facility message shorter than 14 bytes
> 
> The interesting part is that the CID name does come into the * server and is forwarded to the destination phone, the CID name and number does come across from the service provider.
> 
> I’m thinking there is something particular with the DMS-500 and * causing this.  Is there a special terminating setting I can throw into Zapata.conf to help this situation.
> 
> I can send full debug outputs from both working and non-working servers if needed.
> 
> Any help would be greatly appreciated.
> 
> Thanks in advance.
> 
> JR
> 
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users