[Asterisk-Users] DMS-500 CID name not in CDR

jr.richardson at cox.net jr.richardson at cox.net
Fri Jun 10 14:05:12 MST 2005


Hi Guys,

I have several * servers connected to T1 PRI's from various service providers in multiple locations the US.  All the * servers use the same hardware with the same OS and * version.  When connected to 5ESS Switches, using the NI2 (national) PRI protocol, the CID name and number come across fine and populate into the * CDR fine.  I connected to a DMS-500, NI2 (national) protocol and the CID name doesn't get populated in the * CDR.  The only variance in the PRI debug outputs is this, from the DMS switch:

Jun  9 16:41:15 WARNING[30369]: chan_zap.c:7133 zt_pri_error: PRI: !! Facility message shorter than 14 bytes

The interesting part is that the CID name does come into the * server and is forwarded to the destination phone, the CID name and number does come across from the service provider.

I’m thinking there is something particular with the DMS-500 and * causing this.  Is there a special terminating setting I can throw into Zapata.conf to help this situation.

I can send full debug outputs from both working and non-working servers if needed.

Any help would be greatly appreciated.

Thanks in advance.

JR





More information about the asterisk-users mailing list