[Asterisk-Users] Re: Asterisk 1.0.7 on Gentoo
Waldo Rubinstein
waldo at trianet.net
Fri Jun 3 06:08:00 MST 2005
Ok. I recompiled the kernel with CITT support.
After rebooting, I do:
# modprobe zaptel
# dmesg | tail
Zapata Telephony Interface Registered on major 196
Then, I do:
# modprobe ztdummy
FATAL: Error inserting ztdummy (/lib/modules/2.6.11-gentoo-r9/misc/
ztdummy.ko): No such device
# dmesg | tail
Span already appears to be registered
ztdummy: Unable to intialize zaptel driver
# ls -l /lib/modules/2.6.11-gentoo-r9/misc/
total 2164
-rw-r--r-- 1 root root 220036 Jun 3 08:38 tor2.ko
-rw-r--r-- 1 root root 137079 Jun 3 08:38 torisa.ko
-rw-r--r-- 1 root root 149189 Jun 3 08:38 wcfxo.ko
-rw-r--r-- 1 root root 181825 Jun 3 08:38 wcfxs.ko
-rw-r--r-- 1 root root 158167 Jun 3 08:38 wct1xxp.ko
-rw-r--r-- 1 root root 283486 Jun 3 08:38 wct4xxp.ko
-rw-r--r-- 1 root root 213192 Jun 3 08:38 wcte11xp.ko
-rw-r--r-- 1 root root 158008 Jun 3 08:38 wcusb.ko
-rw-r--r-- 1 root root 251830 Jun 3 08:38 zaptel.ko
-rw-r--r-- 1 root root 142320 Jun 3 08:38 ztd-eth.ko
-rw-r--r-- 1 root root 118674 Jun 3 08:38 ztdummy.ko
-rw-r--r-- 1 root root 129133 Jun 3 08:38 ztdynamic.ko
Any other suggestions?
Thanks,
Waldo
On Jun 3, 2005, at 9:07 AM, Maron Kristófersson wrote:
> Hi.
>
> Agree with the above, you probably need the crc_citt module.
> Modules should be loaded before starting zaptel. Use ztcfg -v to
> get specific error messages. If your using this in a production
> environment I suggest buying a card from digium to use as a timer,
> I tried using ztdummy but Meetme is totally out of sync after 10
> minutes.
>
> Regards,
>
> Maron Kristofersson
>
> Ron Wellsted wrote:
>
>> -----BEGIN PGP SIGNED MESSAGE-----
>> Hash: SHA1
>> Waldo Rubinstein wrote:
>>
>>> I installed Asterisk on Gentoo using emerge. At first, emerge
>>> tried installing version 0.9 but reading the wiki showed how to
>>> get the latest stable. I'm running Gentoo kernel 2.6.11-gentoo-r9.
>>>
>>> Asterisk seems to be working just fine, but I'm concerned that
>>> since I
>>> don't have any Digium hardware, I may need a timer source. When I
>>> executed emerge zaptel, it installed zaptel 1.0.7 as well. The
>>> problem
>>> is that I can't seem to be able to load ztdummy or any zaptel
>>> module.
>>>
>>> When I type modprobe ztdummy, I get:
>>>
>>> # modprobe ztdummy
>>>
>>> WARNING: Error inserting zaptel (/lib/modules/2.6.11-gentoo-r9/misc/
>>> zaptel.ko): Unknown symbol in module, or unknown parameter (see
>>> dmesg)
>>> FATAL: Error inserting ztdummy (/lib/modules/2.6.11-gentoo-r9/misc/
>>> ztdummy.ko): Unknown symbol in module, or unknown parameter (see
>>> dmesg)
>>>
>>> # ls -l /lib/modules/2.6.11-gentoo-r9/misc/
>>>
>>> total 2152
>>> -rw-r--r-- 1 root root 219140 Jun 3 00:18 tor2.ko
>>> -rw-r--r-- 1 root root 136183 Jun 3 00:18 torisa.ko
>>> -rw-r--r-- 1 root root 148293 Jun 3 00:18 wcfxo.ko
>>> -rw-r--r-- 1 root root 180929 Jun 3 00:18 wcfxs.ko
>>> -rw-r--r-- 1 root root 157271 Jun 3 00:18 wct1xxp.ko
>>> -rw-r--r-- 1 root root 282590 Jun 3 00:18 wct4xxp.ko
>>> -rw-r--r-- 1 root root 212296 Jun 3 00:18 wcte11xp.ko
>>> -rw-r--r-- 1 root root 157112 Jun 3 00:18 wcusb.ko
>>> -rw-r--r-- 1 root root 250934 Jun 3 00:18 zaptel.ko
>>> -rw-r--r-- 1 root root 141424 Jun 3 00:18 ztd-eth.ko
>>> -rw-r--r-- 1 root root 111094 Jun 3 00:18 ztdummy.ko
>>> -rw-r--r-- 1 root root 128237 Jun 3 00:18 ztdynamic.ko
>>>
>>> # dmesg | tail
>>>
>>> zaptel: Unknown symbol crc_ccitt_table
>>> ztdummy: Unknown symbol zt_receive
>>> ztdummy: Unknown symbol zt_transmit
>>> ztdummy: Unknown symbol zt_unregister
>>> ztdummy: Unknown symbol zt_register
>>>
>>> Can anyone help me? Do I really need or is it recommended to get
>>> a timer? I do need to be able to play MOH as well as have
>>> several MeetMe
>>> rooms. Can anyone tell me what I'm doing wrong? Could it be
>>> something
>>> that I need to compile into the kernel (may be I disabled a
>>> feature)?
>>> Could it be a setting in /etc/make.conf? I'm relatively new to
>>> Gentoo
>>> so I don't have much experience to tell me if it's a
>>> distribution issue
>>> or an asterisk/zaptel issue.
>>>
>>> Thanks,
>>> Waldo
>>>
>> Also running Asterisk 1.0.7, currently on kernel 2.6.11-Gentoo-r6
>> The dmesg output suggests that zaptel wants the crc-ccitt module
>> to be
>> loaded.
>> You need to ensure that your kernel build includes this module and
>> that
>> it is loaded.
>> HTH
>> - --
>> Ron Wellsted
>> http://www.wellsted.org.uk
>> ron at wellsted.org.uk
>> FWD:519961 Gossiptel:9309811
>> N 52.567623, W 2.137621
>> -----BEGIN PGP SIGNATURE-----
>> Version: GnuPG v1.4.1 (GNU/Linux)
>> Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org
>> iQEVAwUBQqAVUUtP/KMNOfRbAQKBCAgAkVcjT0kUUwPefYoI/C7q1DKqQ1W4++Ek
>> y5IlNYf8H+PAG1rDvkaGarquFqf30qHjjNRxTw0f/PHxIFGgkuCO4nmHw6mAjE6g
>> lsVsHsAQ4NKBAk5jrEB2OYqzvHudmIIbGs+ydfVMHJVtzQK0jfg4kUNT4MqD4DUX
>> zCW5kmSWgLHhPUbg6HVJ9yB7J5vzyIfvhiDoxfGy7qN/L1nfBWjOI99GvWH57DTI
>> aU+RhM4zGqM2q7wc1uh/24bLuogNiie3nHl/P52eARqezaJbXV/1n+DfNzR3Vr/z
>> jDGZd0EGPr0N54Hx21gXLxLCyl3D8czNYhvMnM3Z2XhK6hDiUpX4Nw==
>> =ohdx
>> -----END PGP SIGNATURE-----
>> _______________________________________________
>> Asterisk-Users mailing list
>> Asterisk-Users at lists.digium.com
>> http://lists.digium.com/mailman/listinfo/asterisk-users
>> To UNSUBSCRIBE or update options visit:
>> http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
More information about the asterisk-users
mailing list