[Asterisk-Users] Zaptel error: Unable to create channel op type 'Zap'

[Altus Snyman]

I just did the modprobe 2 times and it worked but that was on the 2.6.9 
kernel
Something about core 3 taking its time to create the device
modprobe zaptel
sleep 3
modprobe zaptel
:-)

Peter Raaijmakers wrote:

> Hi,
>
> In struggeling with this problem for a two weeks now.
> I have a X100P clone card in my * box but I'm not able to get it to run.
> I'm running fedora core 3 with kernel 2.6.12-1.1372_FC3 on a VIA 
> EPIAML500EA
>
> The compiling of both zaptel and asterisk went without any errors.
> I can run zaptel and asterisk without any errors.
> When I run ztcfg I don't get any errors too.
>
> But when I try to place a call trough my x100p I get this error 
> message in asterisk:
>  NOTICE app_dial.c:1091 dial_exec_full: Unable to create channel op 
> type 'Zap'
>
> Outside calls are not comming in either.
>
> Here are my zapata.conf and zaptel.conf:
>
> ------------
> -zapata.conf-
> [channels]
> signalling=fxs_ks
> context=incoming
> channel=>1
>
> -zaptel.conf-
> loadzone = nl
> defaultzone=nl
>
> fxsks=1
>
> -----------
>
> The funny part comes here:
> I'm installing a *box for a friend with a ISDN card and the same 
> problem occures.
> So I probarbly doing something wrong in fedora...
>
> Any ideas???
>
> Thanks,
> Peter
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
>