[Asterisk-Users] Junghanns quadBRI on Dell PowerEdge

[Altus Snyman]

The 1ste pc I tried it on was on a expensive intel board and the second 
one that worked was on some cheap name board
Ill say incompatibility ?

> Yes, I do use latest bri-stuff package (asterisk 1.0.9 incl)
>
> Any ideas?
>
> -
> David Hajek
> IT/IS Manager
> Systinet Corporation
> Phone: +420 2 7201 9526
> Cell: +420 604 352 968
> hajek at systinet.com
> http://www.systinet.com
>
>
>
> altus wrote:
>
>> I had the same problems with a 4 port junghanns and a 4 por wcfxs I 
>> took the junghanns out and added it into a new box and all was ok
>> So ether it was because the 2 cards was in together or it was the
>> motherboard?
>> U using the latest driver and asterisk?
>>
>> On Wed, 2005-07-20 at 11:31 +0200, David Hajek wrote:
>>  
>>
>>> Hi,
>>>
>>> we are trying to install Junghann's quadBRI into Dell PowerEdge 2800 
>>> system without success.
>>> I don't know if the issue can be that Junghann's card fits 32-bit 
>>> slot and Dell PE 2800 has
>>> only 3 PCI-X 64-bit slots. Can this be an issue?
>>>
>>> We get  "CRC errors for HDLC frame" when the card is initialized. 
>>> Any idea what can be wrong?
>>>
>>> 1/ We use latest bristuff packages.
>>> 2/ We use TE mode
>>> 3/ Card is working on older 2.4 system, we use same cables and ISDN 
>>> devices.
>>> 4/ On Dell we have a Centos 4.1 with 2.6.12 kernel.
>>>
>>> After loading the driver we got CRC errors like this:
>>>
>>> Jul 19 17:02:30 ustredna kernel: qozap: CRC error for HDLC frame on 
>>> card 1 (cardID 0) S/T port 1
>>> Jul 19 17:02:30 ustredna kernel: qozap: CRC error for HDLC frame on 
>>> card 1 (cardID 0) S/T port 2
>>> Jul 19 17:02:30 ustredna kernel: qozap: CRC error for HDLC frame on 
>>> card 1 (cardID 0) S/T port 3
>>> Jul 19 17:02:30 ustredna kernel: qozap: CRC error for HDLC frame on 
>>> card 1 (cardID 0) S/T port 4
>>> Jul 19 17:02:30 ustredna kernel: qozap: CRC error for HDLC frame on 
>>> card 1 (cardID 0) S/T port 1
>>> Jul 19 17:02:30 ustredna kernel: qozap: CRC error for HDLC frame on 
>>> card 1 (cardID 0) S/T port 2
>>> Jul 19 17:02:30 ustredna kernel: qozap: CRC error for HDLC frame on 
>>> card 1 (cardID 0) S/T port 3
>>> Jul 19 17:02:30 ustredna kernel: qozap: CRC error for HDLC frame on 
>>> card 1 (cardID 0) S/T port 4
>>> Jul 19 17:02:30 ustredna kernel: qozap: CRC error for HDLC frame on 
>>> card 1 (cardID 0) S/T port 1
>>> Jul 19 17:02:30 ustredna kernel: qozap: CRC error for HDLC frame on 
>>> card 1 (cardID 0) S/T port 3
>>> Jul 19 17:02:30 ustredna kernel: qozap: CRC error for HDLC frame on 
>>> card 1 (cardID 0) S/T port 4
>>>
>>>
>>> Loading qozap driver:
>>> Jul 19 17:15:55 ustredna kernel: qozap: no version for "zt_receive" 
>>> found: kernel tainted.
>>> Jul 19 17:15:55 ustredna kernel: qozap: Junghanns.NET quadBRI card 
>>> configured at mem 0xf8836000 IRQ 77 HZ 1000
>>> CardID 0
>>> Jul 19 17:15:55 ustredna kernel: qozap: S/T ports: 4 [ TE TE TE TE ]
>>> Jul 19 17:15:55 ustredna kernel: qozap: 1 multiBRI card(s) in this 
>>> box, 4 BRI ports total.
>>>
>>> Running ztcfg:
>>> Jul 19 17:15:56 ustredna ztcfg:
>>> Jul 19 17:15:56 ustredna ztcfg: SPAN 1: CCS/ AMI Build-out: 399-533 
>>> feet (DSX-1)
>>> Jul 19 17:15:56 ustredna ztcfg: SPAN 2: CCS/ AMI Build-out: 399-533 
>>> feet (DSX-1)
>>> Jul 19 17:15:56 ustredna ztcfg: SPAN 3: CCS/ AMI Build-out: 399-533 
>>> feet (DSX-1)
>>> Jul 19 17:15:56 ustredna ztcfg: SPAN 4: CCS/ AMI Build-out: 399-533 
>>> feet (DSX-1)
>>> Jul 19 17:15:56 ustredna ztcfg:
>>> Jul 19 17:15:56 ustredna ztcfg: Channel map:
>>> Jul 19 17:15:56 ustredna ztcfg:
>>> Jul 19 17:15:56 ustredna ztcfg: Channel 01: Individual Clear channel 
>>> (Default) (Slaves: 01)
>>> Jul 19 17:15:56 ustredna ztcfg: Channel 02: Individual Clear channel 
>>> (Default) (Slaves: 02)
>>> Jul 19 17:15:56 ustredna ztcfg: Channel 03: D-channel (Default) 
>>> (Slaves: 03)
>>> Jul 19 17:15:56 ustredna ztcfg: Channel 04: Individual Clear channel 
>>> (Default) (Slaves: 04)
>>> Jul 19 17:15:56 ustredna ztcfg: Channel 05: Individual Clear channel 
>>> (Default) (Slaves: 05)
>>> Jul 19 17:15:56 ustredna ztcfg: Channel 06: D-channel (Default) 
>>> (Slaves: 06)
>>> Jul 19 17:15:56 ustredna ztcfg: Channel 07: Individual Clear channel 
>>> (Default) (Slaves: 07)
>>> Jul 19 17:15:56 ustredna ztcfg: Channel 08: Individual Clear channel 
>>> (Default) (Slaves: 08)
>>> Jul 19 17:15:56 ustredna ztcfg: Channel 09: D-channel (Default) 
>>> (Slaves: 09)
>>> Jul 19 17:15:56 ustredna ztcfg: Channel 10: Individual Clear channel 
>>> (Default) (Slaves: 10)
>>> Jul 19 17:15:56 ustredna ztcfg: Channel 11: Individual Clear channel 
>>> (Default) (Slaves: 11)
>>> Jul 19 17:15:56 ustredna ztcfg: Channel 12: D-channel (Default) 
>>> (Slaves: 12)
>>> Jul 19 17:15:56 ustredna ztcfg:
>>> Jul 19 17:15:56 ustredna ztcfg: 12 channels configured.
>>> Jul 19 17:15:56 ustredna ztcfg:
>>> Jul 19 17:15:56 ustredna zaptel: Running ztcfg:  succeeded
>>>
>>> Thank you,
>>>
>>> -- 
>>> -
>>> David Hajek
>>> IT/IS Manager
>>> Systinet Corporation
>>> Phone: +420 2 7201 9526
>>> Cell: +420 604 352 968
>>> hajek at systinet.com
>>> http://www.systinet.com
>>>
>>> _______________________________________________
>>> Asterisk-Users mailing list
>>> Asterisk-Users at lists.digium.com
>>> http://lists.digium.com/mailman/listinfo/asterisk-users
>>> To UNSUBSCRIBE or update options visit:
>>>   http://lists.digium.com/mailman/listinfo/asterisk-users
>>>
>>>   
>>
>
>