[Asterisk-Users] Junghanns quadBRI on Dell PowerEdge

David Hajek david.hajek at systinet.com
Wed Jul 20 04:10:23 MST 2005


Yes, I do use latest bri-stuff package (asterisk 1.0.9 incl)

Any ideas?

-
David Hajek
IT/IS Manager
Systinet Corporation
Phone: +420 2 7201 9526
Cell: +420 604 352 968
hajek at systinet.com
http://www.systinet.com



altus wrote:

>I had the same problems with a 4 port junghanns and a 4 por wcfxs 
>I took the junghanns out and added it into a new box and all was ok
>So ether it was because the 2 cards was in together or it was the
>motherboard?
>U using the latest driver and asterisk?
>
>On Wed, 2005-07-20 at 11:31 +0200, David Hajek wrote:
>  
>
>>Hi,
>>
>>we are trying to install Junghann's quadBRI into Dell PowerEdge 2800 
>>system without success.
>>I don't know if the issue can be that Junghann's card fits 32-bit slot 
>>and Dell PE 2800 has
>>only 3 PCI-X 64-bit slots. Can this be an issue?
>>
>>We get  "CRC errors for HDLC frame" when the card is initialized. Any 
>>idea what can be wrong?
>>
>>1/ We use latest bristuff packages.
>>2/ We use TE mode
>>3/ Card is working on older 2.4 system, we use same cables and ISDN 
>>devices.
>>4/ On Dell we have a Centos 4.1 with 2.6.12 kernel.
>>
>>After loading the driver we got CRC errors like this:
>>
>>Jul 19 17:02:30 ustredna kernel: qozap: CRC error for HDLC frame on card 
>>1 (cardID 0) S/T port 1
>>Jul 19 17:02:30 ustredna kernel: qozap: CRC error for HDLC frame on card 
>>1 (cardID 0) S/T port 2
>>Jul 19 17:02:30 ustredna kernel: qozap: CRC error for HDLC frame on card 
>>1 (cardID 0) S/T port 3
>>Jul 19 17:02:30 ustredna kernel: qozap: CRC error for HDLC frame on card 
>>1 (cardID 0) S/T port 4
>>Jul 19 17:02:30 ustredna kernel: qozap: CRC error for HDLC frame on card 
>>1 (cardID 0) S/T port 1
>>Jul 19 17:02:30 ustredna kernel: qozap: CRC error for HDLC frame on card 
>>1 (cardID 0) S/T port 2
>>Jul 19 17:02:30 ustredna kernel: qozap: CRC error for HDLC frame on card 
>>1 (cardID 0) S/T port 3
>>Jul 19 17:02:30 ustredna kernel: qozap: CRC error for HDLC frame on card 
>>1 (cardID 0) S/T port 4
>>Jul 19 17:02:30 ustredna kernel: qozap: CRC error for HDLC frame on card 
>>1 (cardID 0) S/T port 1
>>Jul 19 17:02:30 ustredna kernel: qozap: CRC error for HDLC frame on card 
>>1 (cardID 0) S/T port 3
>>Jul 19 17:02:30 ustredna kernel: qozap: CRC error for HDLC frame on card 
>>1 (cardID 0) S/T port 4
>>
>>
>>Loading qozap driver:
>>Jul 19 17:15:55 ustredna kernel: qozap: no version for "zt_receive" 
>>found: kernel tainted.
>>Jul 19 17:15:55 ustredna kernel: qozap: Junghanns.NET quadBRI card 
>>configured at mem 0xf8836000 IRQ 77 HZ 1000
>>CardID 0
>>Jul 19 17:15:55 ustredna kernel: qozap: S/T ports: 4 [ TE TE TE TE ]
>>Jul 19 17:15:55 ustredna kernel: qozap: 1 multiBRI card(s) in this box, 
>>4 BRI ports total.
>>
>>Running ztcfg:
>>Jul 19 17:15:56 ustredna ztcfg:
>>Jul 19 17:15:56 ustredna ztcfg: SPAN 1: CCS/ AMI Build-out: 399-533 feet 
>>(DSX-1)
>>Jul 19 17:15:56 ustredna ztcfg: SPAN 2: CCS/ AMI Build-out: 399-533 feet 
>>(DSX-1)
>>Jul 19 17:15:56 ustredna ztcfg: SPAN 3: CCS/ AMI Build-out: 399-533 feet 
>>(DSX-1)
>>Jul 19 17:15:56 ustredna ztcfg: SPAN 4: CCS/ AMI Build-out: 399-533 feet 
>>(DSX-1)
>>Jul 19 17:15:56 ustredna ztcfg:
>>Jul 19 17:15:56 ustredna ztcfg: Channel map:
>>Jul 19 17:15:56 ustredna ztcfg:
>>Jul 19 17:15:56 ustredna ztcfg: Channel 01: Individual Clear channel 
>>(Default) (Slaves: 01)
>>Jul 19 17:15:56 ustredna ztcfg: Channel 02: Individual Clear channel 
>>(Default) (Slaves: 02)
>>Jul 19 17:15:56 ustredna ztcfg: Channel 03: D-channel (Default) (Slaves: 
>>03)
>>Jul 19 17:15:56 ustredna ztcfg: Channel 04: Individual Clear channel 
>>(Default) (Slaves: 04)
>>Jul 19 17:15:56 ustredna ztcfg: Channel 05: Individual Clear channel 
>>(Default) (Slaves: 05)
>>Jul 19 17:15:56 ustredna ztcfg: Channel 06: D-channel (Default) (Slaves: 
>>06)
>>Jul 19 17:15:56 ustredna ztcfg: Channel 07: Individual Clear channel 
>>(Default) (Slaves: 07)
>>Jul 19 17:15:56 ustredna ztcfg: Channel 08: Individual Clear channel 
>>(Default) (Slaves: 08)
>>Jul 19 17:15:56 ustredna ztcfg: Channel 09: D-channel (Default) (Slaves: 
>>09)
>>Jul 19 17:15:56 ustredna ztcfg: Channel 10: Individual Clear channel 
>>(Default) (Slaves: 10)
>>Jul 19 17:15:56 ustredna ztcfg: Channel 11: Individual Clear channel 
>>(Default) (Slaves: 11)
>>Jul 19 17:15:56 ustredna ztcfg: Channel 12: D-channel (Default) (Slaves: 
>>12)
>>Jul 19 17:15:56 ustredna ztcfg:
>>Jul 19 17:15:56 ustredna ztcfg: 12 channels configured.
>>Jul 19 17:15:56 ustredna ztcfg:
>>Jul 19 17:15:56 ustredna zaptel: Running ztcfg:  succeeded
>>
>>Thank you,
>>
>>-- 
>>-
>>David Hajek
>>IT/IS Manager
>>Systinet Corporation
>>Phone: +420 2 7201 9526
>>Cell: +420 604 352 968
>>hajek at systinet.com
>>http://www.systinet.com
>>
>>_______________________________________________
>>Asterisk-Users mailing list
>>Asterisk-Users at lists.digium.com
>>http://lists.digium.com/mailman/listinfo/asterisk-users
>>To UNSUBSCRIBE or update options visit:
>>   http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>>    
>>



More information about the asterisk-users mailing list