[Asterisk-Users] Quadbri trouble

[tonini.massimo at tiscali.it]

Hi, Thank you again for the help is there a way to debug the isdn ?


Bye



Emanuele Pucciarelli <ep at acm.org> 
Sent by: asterisk-users-bounces at lists.digium.com
19/07/2005 18.02
Please respond to
Asterisk Users Mailing List - Non-Commercial Discussion 
<asterisk-users at lists.digium.com>


To
Asterisk Users Mailing List - Non-Commercial Discussion 
<asterisk-users at lists.digium.com>
cc

Subject
Re: [Asterisk-Users] Quadbri trouble






tonini.massimo at tiscali.it ha scritto:

> I know the configuration of telco is point-to-point and I think the card 

> have to work in NT mode (I presume because I have
> not found the documentation about this and when attach to the ISDN the 
> led become green).

If you're connecting the card to a NT1/NT1+, then *that* is the NT 
(network termination); your card has to work in TE (terminal equipment) 
mode.  The card must be in NT mode when * has to work as the "network" 
side (you were mentioning a Hipath PBX a couple of weeks ago...)

> signalling = bri_net

bri_cpe

> pridialplan = local
> prilocaldialplan = local

They'll probably have to be "dynamic" and "unknown".

Bye,

-- 
Emanuele
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050719/0142f27a/attachment.htm