[Asterisk-Users] TDM01B card configuration

Rich Adamson radamson at routers.com
Mon Jul 4 17:55:14 MST 2005


Well, that looks correct. Might check zapata.conf and ensure there aren't
any other types, etc, in that. Also, might change both /etc/zaptel.conf and
zapata.conf to use fxs_ks just to be sure there isn't a bug lurking with
the loopstart stuff. Is there a specific reason you're trying to use
loopstart?

Are you running Stable or Head, and what version?

------------------------

> The /var/log/messages lists:
> kernel: Module 0: Not installed
> kernel: Module 1: Not installed
> kernel: Module 2: Not installed Jul  3 22:21:10 
> kernel: Module 3: Installed -- AUTO FXO (FCC mode) 
> kernel: Found a Wildcard TDM: Wildcard TDM400P REV I
> (4 modules)
> 
> the ztcfg -vv:
> Zaptel Configuration
> ======================
> 
> 
> Channel map:
> 
> Channel 04: FXS Loopstart (Default) (Slaves: 04)
> 
> 1 channels configured.
> 
> When you try to start asterisk. the following errors
> appear
> 
> Jul  4 10:37:59 NOTICE[4015]: res_odbc.c:518
> load_module: res_odbc loaded.
> .........Jul  4 10:37:59 ERROR[4015]: chan_zap.c:6584
> mkintf: Signalling requested on channel 4 is FXO
> Loopstart but line is in FXS Loopstart signalling
> Jul  4 10:37:59 ERROR[4015]: chan_zap.c:9927
> setup_zap: Unable to register channel '4'
> Jul  4 10:37:59 WARNING[4015]: loader.c:402
> __load_resource: chan_zap.so: load_module failed,
> returning -1
> Jul  4 10:37:59 WARNING[4015]: loader.c:523
> load_modules: Loading module chan_zap.so failed!
> 
> Any ideas?
> 
> 
> --- Rich Adamson <radamson at routers.com> wrote:
> 
> > > I am trying the setup the TDM01B card. 1 FXO. I
> > > connected it to a regular home line. in the
> > > /etc/zaptel.conf, I have 
> > > fxsls=4
> > > In the /etc/asterisk/zapata.conf
> > > I have:
> > > signaling=fxs_ls
> > > language=en
> > > group=1
> > > context=default
> > > channel => 4
> > > 
> > > When I start asterisk, I get this error:
> > > ERROR[10376]: chan_zap.c:6584 mkintf; Signaling
> > > requested on channel 4 is FXO Loopstart but line
> > is in
> > > FXS Loopstart Signaling
> > > 
> > > chan_zap.c:9927 setup_zap: Unable to register
> > channel
> > > '4'
> > > 
> > > Maybe I have something misconfigured. However, I
> > > triead all combinations and it doesn't seem to
> > work. 
> > > 
> > > If I take away those lines. Asterisk comes up and
> > in
> > > zaptel show command, I see the TDM400P card.
> > > Please help.
> > > Thanks
> > 
> > What do you see listed in 'dmesg'? 
> > 
> > It should look something like:
> > Module 0: Installed -- AUTO FXO (FCC mode)
> > Module 1: Installed -- AUTO FXO (FCC mode)
> > Module 2: Installed -- AUTO FXO (FCC mode)
> > Module 3: Installed -- AUTO FXO (FCC mode)
> > (The above example is from a TDM with four fxo
> > modules installed.)
> > 
> > What do you see listed in 'ztcfg -vv'?
> > 
> > It should look something like:
> > Channel 01: FXS Kewlstart (Default) (Slaves: 01)
> > Channel 02: FXS Kewlstart (Default) (Slaves: 02)
> > Channel 03: FXS Kewlstart (Default) (Slaves: 03)
> > Channel 04: FXS Kewlstart (Default) (Slaves: 04)
> > (Again, the above is from a TDM with four fxo
> > modules, each configured
> > for Kewlstart, not loopstart.)
> > 
> > If you're not seeing entries similar to the above,
> > I'd have to guess
> > that changes made to /etc/zaptel.conf and
> > /etc/asterisk/zapata.conf
> > are probably out of sync. (Meaning changes have been
> > made to one or
> > the other without restarting asterisk AND zaptel.)
> > 





More information about the asterisk-users mailing list