[Asterisk-Users] Am I missing something really basic here?????helpwith Asterisk@home {Scanned} {Scanned}

[David Shaw]

I'm running Asterisk at Home. I had to edit /etc/zaptel.conf
and /etc/asterisk/zapata.conf. After that it works great. 

David..


On Thu, 2005-01-27 at 09:54 -0500, dean collins wrote:
> Ok, I thought the point of asterisk at home was that it automatically
> detected the X100P board and configured it correctly.
> 
>  
> 
> Is this incorrect? You still need to modify /etc/zaptel files? And not
> just using the AMP configurator.
> 
>  
> 
> There is no mention of this on the Asterisk at home webpage.
> 
>  
> 
> Can anyone who has actually used ast6erisk at home confirm this one way
> or the other?
> 
>  
> 
>  
> 
> Thanks,
> 
> Dean
> 
>  
> 
>  
> 
>  
> 
>                                    
> ______________________________________________________________________
> 
> From:asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-
> bounces at lists.digium.com] On Behalf Of David Shaw
> Sent: Thursday, January 27, 2005 9:28 AM
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: Re: [Asterisk-Users] Am I missing something really basic
> here?????helpwith Asterisk at home {Scanned}
> 
> 
>  
> 
> Yes, You need to add channels to your zapata.conf file.
> 
> 
>  
> 
> 
> zapata.conf
> 
> 
> [channels]
> ;
> ; X100P plugged into PSTN
> ; X100P # 1
> ;[line1]
> context=line1
> signalling=fxs_ks
> echocancel=yes
> echocancelwhenbridged=yes
> relaxdtmf=yes
> rxgain=1.5
> txgain=1.5
> immediate=no
> busydetect=no
> callprogress=no
> musiconhold=default
> usecallerid=yes
> callerid=asreceived
> channel => 1
> 
> 
>  
> 
> 
> You might need to edit /etc/zaptel.conf
> 
> 
> Check fxsks=1-4 I have four X100P cards.
> 
> 
> If you have one change it to fxsks=1
> 
> 
>  
> 
> 
> extensions.conf
> 
> 
>  
> 
> 
> [general]
> static=yes
> writeprotect=no
> 
> 
>  
> 
> 
> [globals]
> CONSOLE=Console/dsp                             ; Console interface
> for demo
> IAXINFO=guest                                   ; IAXtel
> username/password
> TRUNKL1=Zap/1
> TRUNKL2=Zap/2
> TRUNKL3=Zap/3
> TRUNKL4=Zap/4                                   ; Trunk interface
> TRUNKMSD=1                                      ; MSD digits to strip
> (usually 1 or 0)
> 
> 
>  
> 
> 
> [line1]
> exten => s,1,Dial(SIP/101,20)
> exten => s,2,Answer
> exten => s,3,Wait,1
> exten => s,4,Voicemail,101
> exten => s,5,Hangup
> 
> 
>  
> 
> 
> Here I have TRUNKL1=Zap/? for each X100P cards.
> 
> 
>  
> 
> 
> [line1] tells asterisk how to answer that line. 
> 
> 
>  
> 
> 
> Remember I'm very new at this, but I didn't see anyone respond to your
> post.
> 
> 
>  
> 
> 
> Goog luck, David
> 
> 
>  
> 
> 
>  
> 
> 
>  
> 
> 
>  
> 
> 
>         ----- Original Message ----- 
>         
>         
>         From: dean collins 
>         
>         
>         To: Asterisk Users Mailing List - Non-Commercial Discussion 
>         
>         
>         Sent: Wednesday, January 26, 2005 5:36 AM
>         
>         
>         Subject: [Asterisk-Users] Am I missing something really basic
>         here????? helpwith Asterisk at home {Scanned}
>         
>         
>          
>         
>         
>         I’m trying to install asterisk at home, I’ve just downloaded the
>         latest cd from soundforge. I can get it to install ok (network
>         card didn’t auto configure – but I worked out how to use
>         ‘netconfig’).
>         
>          
>         
>         I worked out how to add a few grandstream budgetone fine.
>         Worked out how to upload music etc. Worked out how to modify
>         FOP.
>         
>          
>         
>         Voicemail and meetme’s work fine.
>         
>          
>         
>         HOWEVER….
>         
>          
>         
>         I’m using a X100p. I cant get it to make a call out or use the
>         default extension for an incoming line.
>         
>          
>         
>         What do I need to make the pstn connection work? Do I need to
>         modify Zapata.conf? there are zero instructions on the
>         asterisk at home page as to what to do.
>         
>          
>         
>         Can anyone help me out here.
>         
>          
>         
>          
>         
>         TIA,
>         
>         Dean
>         
>         
>         -- 
>         This message has been scanned for viruses and 
>         dangerous content by MailScanner, and is 
>         believed to be clean. 
>         MailScanner thanks transtec Computers for their support. 
>         Plase contact support at computer-medic.us if you have questions
>         about this email. 
>         
>                                        
>         ______________________________________________________________
>         
>         _______________________________________________
>         Asterisk-Users mailing list
>         Asterisk-Users at lists.digium.com
>         http://lists.digium.com/mailman/listinfo/asterisk-users
>         To UNSUBSCRIBE or update options visit:
>            http://lists.digium.com/mailman/listinfo/asterisk-users
>         
> 
> -- 
> This message has been scanned for viruses and 
> dangerous content by KE6UPI, and is 
> believed to be clean. 
> MailScanner thanks transtec Computers for their support. 
> Plase contact Support at KE6UPI if you have questions about this
> email. 
> -- 
> This message has been scanned for viruses and 
> dangerous content by MailScanner, and is 
> believed to be clean. 
> MailScanner thanks transtec Computers for their support. 
> Plase contact support at computer-medic.us if you have questions about
> this email. 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
-- 
David Shaw <asterisk at ke6upi.com>