[Asterisk-Users] chan_skinny and firmware upgrade

[Steve Hanselman]

>From the very early days of Cisco skinny the phones have all requested
XMLDefault.cnf.xml, you just need to pop it in there (either run a tcpdump
on the tftp port or run the daemon in logging mode and you'll see).

Steve


-----Original Message-----
From: Subhi S Hashwa [mailto:lists at subhi.com] 
Sent: 24 January 2005 14:46
To: Steve Hanselman
Cc: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: Re: [Asterisk-Users] chan_skinny and firmware upgrade

Monday, January 24, 2005, 9:23:50 AM, Steve Hanselman wrote:

> Nothing to do with skinny, drop the new file(s) in your tftp directory and
> edit the .xml file to specify the new version, the phone will upgrade
itself
> when it loads the config.

the firmware I have doesn't request xml file it requests SEP<MAC>.cnf
I udnerstand the new versions of firmware request SEP<MAC>.cnf.xml.

Not sure where to go from here, any ideas?





-- 
Best regards,
 Subhi S Hashwa                            mailto:lists at subhi.com
 When everything is heading your way, you're in the wrong lane.


The information contained in this email is intended for the personal and confidential use
of the addressee only. It may also be privileged information. If you are not the intended
recipient then you are hereby notified that you have received this document in error and
that any review, distribution or copying of this document is strictly prohibited. If you have 
received  this communication in error, please notify Brendata immediately on: 

+44 (0)1268 466100, or email 'technical at brendata.co.uk' 

Brendata (UK) Ltd
Nevendon Hall, Nevendon Road, Basildon, Essex. SS13 1BX  UK
Registered Office as above. Registered in England No. 2764339

See our current vacancies at www.brendata.co.uk