[Asterisk-Users] Asterisk and IAX softphone (firefly)problem/question

[Mark]

I had exactly the same problem.  I de-installed Firefly, pruned my WinXP
registry of all of the settings, re-installed, and have not had the problem
since.  I can't explain why, but that was my experience...

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Chris Hertz
Sent: Tuesday, January 18, 2005 2:32 PM
To: asterisk-users at lists.digium.com
Subject: [Asterisk-Users] Asterisk and IAX softphone
(firefly)problem/question


Quick question from a newbie, 

I have asterisk configured to dial IAX extensions (which works).  When
dialing from one IAX extension (using Firefly) to another IAX extension
(also using Firefly), the Firefly client rings on the receiving end and
gives the option of accepting or denying the call.  However, when I dial in
to Asterix using a VoicePulse number and dial the same extension Firefly
immediately picks up the call without warning the receiver.  Then oddly
enough while the call is already connected, still gives the option of
accepting or rejecting the call.  Then after 20 seconds (as specified in
extensions.conf), if the receiver hasn't accepted the call on Firefly
Asterix pulls the call back and dumps it into voicemail.  I have played with
the settings, but can't seem to figure out why Firefly is automatically
picking up the call.  Below I have included relevant (or at least what I
thought was relevant) code from extensions, iax and debug.  Any help would
be greatly appreciated.  Thanks, Chris

**************extensions.conf (snippet)*********************

[default]
exten => s,1,Wait,1                     ; Wait a second, to create buffer
for lag
exten => s,1,DigitTimeout,5             ; Set Digit Timeout
exten => s,2,ResponseTimeout,10         ; Set Response Timeout
exten => s,3,BackGround(demo-congrats)  ; Play a congratulatory message
exten => s,4,BackGround(demo-instruct)  ; Play some instructions

; extension 101
exten => 101,1,Playback(transfer,skip)    
exten => 101,2,Macro(stdexten,101,IAX2/test/101)

[macro-stdexten];
;   ${ARG1} - Extension  (we could have used ${MACRO_EXTEN} here as well
;   ${ARG2} - Device(s) to ring
exten => s,1,Dial(${ARG2},20,tT)    ;
Dial(type/identifier,timeout,options,URL)
exten => s,2,Goto(s-${DIALSTATUS},1)
exten => s-NOANSWER,1,Voicemail(u${ARG1})
exten => s-NOANSWER,2,Goto(default,s,1)
exten => s-BUSY,1,Voicemail(b${ARG1})
exten => s-BUSY,2,Goto(default,s,1)
exten => _s-.,1,Goto(s-NOANSWER,1)
exten => a,1,VoicemailMain(${ARG1})

**************iax.conf (snippet)***************************

[test]
type=friend
context=outgoing
auth=md5
secret=xxxxx
notransfer=1
host=dynamic
allow=ilbc
allow=gsm
mailbox=101
qualify=no
callerid="Test Person" <xxx xxx xxxx>

********************debug output from external call
(snippet)**************************
    -- Executing Dial("IAX2/voicepulse-in-01 at ipaddress/8", "IAX2/test|20")
in new stack
    -- Called test
    -- Call accepted by <ipaddress> (format gsm)
    -- Format for call is gsm
    -- IAX2/test/5 is ringing
    -- Nobody picked up in 20000 ms
    -- Hungup 'IAX2/test/5'
    -- Executing Goto("IAX2/voicepulse-in-01 at ipaddress/8", "s-NOANSWER|1")
in new stack
    -- Goto (macro-stdexten,s-NOANSWER,1)
    -- Executing VoiceMail("IAX2/voicepulse-in-01 at ipaddress/8", "u101") in
new stack

_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users