[Asterisk-Users] Asterisk and Voice Pulse Open Access

[Brian Dingman]

This link might help:
http://www.dslreports.com/forum/remark,11775216~mode=flat


On Fri, 14 Jan 2005 23:29:34 -0500, Randy <merlinast at camelot.org> wrote:
> Chris,
> 
> I do not have VoicePulse Open Access, but I do have an incoming number through
> VoicePulse Connect.  You might want to give the following a try unless you get
> a repsonse back from someone who uses Open Access specifically.  (I found the
> access1.voicepulse.com address from another posting.)
> 
> Edit sip.conf and extensions.conf as follows, editing the 2165551212 to
> match your assigned phone number from VoicePulse, as well as filling in your
> userid and password.
> 
> To have the extension go to another context than default, you must specify it
> as the context in the general section in sip.conf - I was unable to get the
> normal peer matching to work for voicepulse, at the moment I suspect its due
> to inconsistent rev mappings for their ip's.  If you do not have an extension
> that matches your number, it will defer to 's'.
> 
> sip.conf
> 
> ; in your [general] section add:
> register => userid:password at access1.voicepulse.com
> 
> extensions.conf
> 
> ; add an extension matching your phone number to your default context (or the
> ; context specified in sip.conf)
> exten => 2165551212,1,Answer
> exten => 2165551212,2,Wait,1
> exten => 2165551212,3,Playback(vm-goodbye)
> exten => 2165551212,4,Hangup
> 
> Hope this works for you - it does for me with VoicePulse Connect.
> 
> Randy
> 
> On Fri, Jan 14, 2005 at 10:19:17PM -0500, Chris Wallace wrote:
> >
> >    Has  any  messed  with  getting Asterisk to work using the Voice Pulse
> >    Open Access plan?  I currently have 2 numbers with Voice Pulse, 1 is a
> >    number  that  is  assigned to their hardware device (Sipura SPA-2000),
> >    the  other  is a Open Access number that uses SIP from any device (you
> >    must  authenticate  with  them).   I  want  to be able to use the Open
> >    Access number on my Asterisk server here at home with no FXO cards.  I
> >    have  having  a hard time getting this to work; I have only been using
> >    Asterisk for about a week now.  I have managed to get Asterisk working
> >    with  a plain phone line going into an XP100.  This list is an awesome
> >    tool, any help would be appreciated!!!
> >
> >
> >    Chris
> 
> > _______________________________________________
> > Asterisk-Users mailing list
> > Asterisk-Users at lists.digium.com
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> > To UNSUBSCRIBE or update options visit:
> >    http://lists.digium.com/mailman/listinfo/asterisk-users
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>