[Asterisk-Users] Digium Card Problems

[Mark Kidd]

Hi all

i need urgent help our entire switchboard is down only 5 days after it came
up.

this is the second time this has happened and i am thinking that asterisk is
not worth the trouble it gives.

mostly it runs without hassle. but around 2 weeks ago during the test phase
we rebooted the machine and
did the normal modprobes and this error popped up.

coming back to work after the weekend the machine was put on and same thing
again please see below.


modprobe zaptel -> no problems
[root at asterisk root]# modprobe wcfxo
/lib/modules/2.4.20-8/misc/wcfxo.o: init_module: No such device
Hint: insmod errors can be caused by incorrect module parameters, including
inva
lid IO or IRQ parameters.
      You may find more information in syslog or the output from dmesg
/lib/modules/2.4.20-8/misc/wcfxo.o: insmod
/lib/modules/2.4.20-8/misc/wcfxo.o fa
iled
/lib/modules/2.4.20-8/misc/wcfxo.o: insmod wcfxo failed

[root at asterisk root]# modprobe wcfxs
/lib/modules/2.4.20-8/misc/wctdm.o: init_module: No such device
Hint: insmod errors can be caused by incorrect module parameters, including
inva
lid IO or IRQ parameters.
      You may find more information in syslog or the output from dmesg
/lib/modules/2.4.20-8/misc/wctdm.o: insmod
/lib/modules/2.4.20-8/misc/wctdm.o fa
iled
/lib/modules/2.4.20-8/misc/wctdm.o: insmod wcfxs failed

we are running the 4 port fxo digium card. so normal the modprobe wcfxs no
problems modules load and board comes up after
starting asterisk.

i i said this is now the second time this has happened cannot remember what
we did to fix this the first time if
memory is correct it just decide to work after a while when loading the
modules.

i am now looking like an idiot as i punted this solution rather hard and now
we have no board up.

please if anyone can help.

Regards

-------------------------------------

Mark Kidd