[Asterisk-Users] Outbound call on TDM400P

[Lyle Giese]

Put a 'w'ait in your dial command.  * is probably dialing too quickly after going off-hook.

Lyle

  ----- Original Message ----- 
  From: Guy C. Guckenberger 
  To: asterisk-users at lists.digium.com 
  Sent: Sunday, February 27, 2005 12:00 PM
  Subject: [Asterisk-Users] Outbound call on TDM400P


  Ok all here is a strange one......

  I have a TDM400P with 3 fxo modules.  I can very rarely make an outbound call to the PSTN....about once every 10 tries.  However if I use a analog phone pluged into the same phone line as one of the tdm channels say channel 4, and I place the analog phone off hook and then place a call via asterisk , it work everytime.  It seems like the TDM400p is having trouble grabbing the outbound circuit.  I have tried  this on all three fxo modules and get the same results.  Inbound calls work fine as do SIP calls.  Anyone else run into this?  Maybe I have bad hardware?



  Thanks


------------------------------------------------------------------------------


  _______________________________________________
  Asterisk-Users mailing list
  Asterisk-Users at lists.digium.com
  http://lists.digium.com/mailman/listinfo/asterisk-users
  To UNSUBSCRIBE or update options visit:
     http://lists.digium.com/mailman/listinfo/asterisk-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050227/68799dd0/attachment.htm