[Asterisk-Users] ztdummy on Gentoo 2.6.10 Box
Richard J. Sears
rsears at americanIS.net
Mon Feb 14 18:15:53 MST 2005
Hi Guills,
The module was actually already done, just not loaded !!
Many thanks for the help on this one!!
On Mon, 14 Feb 2005 16:29:31 -0800
"Chamberland-Larose, Guillaume" <guillaume at ea.com> wrote:
> This last error message now means zaptel is compiled (which it wasn't
> before) but now it can't find that table.
>
> You need to enable it in your kernel config it seems. As mentionned
> here:
> http://lists.digium.com/pipermail/asterisk-dev/2004-December/008303.html
>
> "The option to turn this on is in the last submenu of the kernel config
> menu."
>
> Guills
>
> > -----Original Message-----
> > From: Richard J. Sears [mailto:rsears at americanIS.net]
> > Sent: Monday, February 14, 2005 4:24 PM
> > To: Asterisk Users Mailing List - Non-Commercial Discussion
> > Cc: Chamberland-Larose, Guillaume
> > Subject: Re: [Asterisk-Users] ztdummy on Gentoo 2.6.10 Box
> >
> > Hi Guills,
> >
> > I followed the instructions exactly as described on the voip
> > pages as well as your instructions below.
> >
> > I still get the same errors.
> >
> >
> > pbx01 zaptel # modprobe zaptel
> > FATAL: Error inserting zaptel
> > (/lib/modules/2.6.10-gentoo-r6/misc/zaptel.ko): Unknown
> > symbol in module, or unknown parameter (see dmesg)
> >
> >
> > DMESG:
> > zaptel: Unknown symbol crc_ccitt_table
> >
> >
> > And of course ztdummy fails to load becuase the zaptel does not load.
> >
> > Thanks
> >
> >
> > On Mon, 14 Feb 2005 13:55:04 -0800
> > "Chamberland-Larose, Guillaume" <guillaume at ea.com> wrote:
> >
> > > The ztdummy requires zaptel to be loaded. You don't need any zaptel
> > > devices just the kernel module. Get zaptel then follow the
> > instructions
> > > on the wiki @ http://www.voip-info.org/wiki-Asterisk+timer+ztdummy
> > > i.e.:
> > >
> > > ztdummy and Kernel 2.6
> > > Recent CVS versions (as of July 2004) also have zaptel modules which
> > > work with 2.6 kernels (type "make linux26" to compile them). The 2.6
> > > version of the ztdummy module is completely different to the 2.4
> > > version. Firstly it does not rely on the USB hardware being there;
> > > instead it uses the PC hardware's clock (which under 2.6
> > kernels can be
> > > set to generate interrupts at the required precision), so
> > it can be used
> > > on any machine, rather than only those with the right USB hardware.
> > > Effectively the 2.6 version of ztdummy does the same job as
> > zaprtc does
> > > for 2.4 kernels. I have been using ztdummy for 2.6 for a
> > while now, and
> > > have had no problems with it.
> > >
> > > To install, simply checkout zaptel from the Asterisk CVS and do the
> > > following:
> > >
> > > - cd /usr/src/zaptel
> > >
> > > * READ /usr/src/zaptel/README.udev and follow the steps
> > > * check modules on: /etc/sysconfig/zaptel> if you have no digium
> > > hardware comment out all modeules except ztdummy.
> > >
> > > - make linux26
> > > - modprobe zaptel
> > > - modprobe ztdummy
> > >
> > > Cheers,
> > > Guills
> > >
> > >
> > > > -----Original Message-----
> > > > From: Richard J. Sears [mailto:rsears at americanIS.net]
> > > > Sent: Monday, February 14, 2005 1:16 PM
> > > > To: asterisk-users at lists.digium.com
> > > > Subject: [Asterisk-Users] ztdummy on Gentoo 2.6.10 Box
> > > >
> > > > Hi Everyone,
> > > >
> > > > I read through the list on the issues with the ztdummy driver
> > > > which I need for MeetMe, but I seem to have come across a
> > > > problem that I cannot seem to find an answer for.
> > > >
> > > > I am running Gentoo 2.6.10 on an Intel box.
> > > >
> > > > I have read the the wiki entries on the ztdummy and followed
> > > > the instructions as they relate to the 2.6 kernel.
> > > >
> > > > Everything compiled great, but a modprobe ztdummy returned this:
> > > >
> > > > WARNING: Error inserting zaptel
> > > > (/lib/modules/2.6.10-gentoo-r6/misc/zaptel.ko): Unknown
> > > > symbol in module, or unknown parameter (see dmesg)
> > > > WARNING: Error inserting zaptel
> > > > (/lib/modules/2.6.10-gentoo-r6/misc/zaptel.ko): Unknown
> > > > symbol in module, or unknown parameter (see dmesg)
> > > > FATAL: Error inserting ztdummy
> > > > (/lib/modules/2.6.10-gentoo-r6/misc/ztdummy.ko): Unknown
> > > > symbol in module, or unknown parameter (see dmesg)
> > > > FATAL: Error running install command for ztdummy
> > > >
> > > >
> > > > Here is what my dmesg says:
> > > >
> > > > zaptel: Unknown symbol crc_ccitt_table
> > > > zaptel: Unknown symbol crc_ccitt_table
> > > > ztdummy: Unknown symbol zt_receive
> > > > ztdummy: Unknown symbol zt_transmit
> > > > ztdummy: Unknown symbol zt_unregister
> > > > ztdummy: Unknown symbol zt_register
> > > >
> > > >
> > > >
> > > > I DO NOT have any Zaptel devices in my system and I VIed the
> > > > makefile and uncommented the ztdummy as instructed.
> > > >
> > > >
> > > > I guess my question is - what the heck is happeneing. Why is
> > > > ztdummy trying to load zaptel which I do not have in my system..?
> > > >
> > > >
> > > > Any help would be greatly appreciated.
> > > >
> > > >
> > > > Thanks
> > > >
> > > >
> > > >
> > > > ******************************************
> > > > Richard J. Sears
> > > > Vice President
> > > > American Internet Services
> > > > ----------------------------------------------------
> > > > rsears at adnc.com
> > > > http://www.adnc.com
> > > > ----------------------------------------------------
> > > > 858.576.4272 - Phone
> > > > 858.427.2401 - Fax
> > > > INOC-DBA - 6130
> > > > ----------------------------------------------------
> > > >
> > > > I fly because it releases my mind
> > > > from the tyranny of petty things . .
> > > >
> > > >
> > > > "Work like you don't need the money, love like you've
> > > > never been hurt and dance like you do when nobody's
> > > > watching."
> > > >
> > > > _______________________________________________
> > > > Asterisk-Users mailing list
> > > > Asterisk-Users at lists.digium.com
> > > > http://lists.digium.com/mailman/listinfo/asterisk-users
> > > > To UNSUBSCRIBE or update options visit:
> > > > http://lists.digium.com/mailman/listinfo/asterisk-users
> > > >
> > > _______________________________________________
> > > Asterisk-Users mailing list
> > > Asterisk-Users at lists.digium.com
> > > http://lists.digium.com/mailman/listinfo/asterisk-users
> > > To UNSUBSCRIBE or update options visit:
> > > http://lists.digium.com/mailman/listinfo/asterisk-users
> >
> >
> > ******************************************
> > Richard J. Sears
> > Vice President
> > American Internet Services
> > ----------------------------------------------------
> > rsears at adnc.com
> > http://www.adnc.com
> > ----------------------------------------------------
> > 858.576.4272 - Phone
> > 858.427.2401 - Fax
> > INOC-DBA - 6130
> > ----------------------------------------------------
> >
> > I fly because it releases my mind
> > from the tyranny of petty things . .
> >
> >
> > "Work like you don't need the money, love like you've
> > never been hurt and dance like you do when nobody's
> > watching."
> >
> >
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
******************************************
Richard J. Sears
Vice President
American Internet Services
----------------------------------------------------
rsears at adnc.com
http://www.adnc.com
----------------------------------------------------
858.576.4272 - Phone
858.427.2401 - Fax
INOC-DBA - 6130
----------------------------------------------------
I fly because it releases my mind
from the tyranny of petty things . .
"Work like you don't need the money, love like you've
never been hurt and dance like you do when nobody's
watching."
More information about the asterisk-users
mailing list