[Asterisk-Users] ztdummy on Gentoo 2.6.10 Box
Chamberland-Larose, Guillaume
guillaume at ea.com
Mon Feb 14 17:29:31 MST 2005
This last error message now means zaptel is compiled (which it wasn't
before) but now it can't find that table.
You need to enable it in your kernel config it seems. As mentionned
here:
http://lists.digium.com/pipermail/asterisk-dev/2004-December/008303.html
"The option to turn this on is in the last submenu of the kernel config
menu."
Guills
> -----Original Message-----
> From: Richard J. Sears [mailto:rsears at americanIS.net]
> Sent: Monday, February 14, 2005 4:24 PM
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Cc: Chamberland-Larose, Guillaume
> Subject: Re: [Asterisk-Users] ztdummy on Gentoo 2.6.10 Box
>
> Hi Guills,
>
> I followed the instructions exactly as described on the voip
> pages as well as your instructions below.
>
> I still get the same errors.
>
>
> pbx01 zaptel # modprobe zaptel
> FATAL: Error inserting zaptel
> (/lib/modules/2.6.10-gentoo-r6/misc/zaptel.ko): Unknown
> symbol in module, or unknown parameter (see dmesg)
>
>
> DMESG:
> zaptel: Unknown symbol crc_ccitt_table
>
>
> And of course ztdummy fails to load becuase the zaptel does not load.
>
> Thanks
>
>
> On Mon, 14 Feb 2005 13:55:04 -0800
> "Chamberland-Larose, Guillaume" <guillaume at ea.com> wrote:
>
> > The ztdummy requires zaptel to be loaded. You don't need any zaptel
> > devices just the kernel module. Get zaptel then follow the
> instructions
> > on the wiki @ http://www.voip-info.org/wiki-Asterisk+timer+ztdummy
> > i.e.:
> >
> > ztdummy and Kernel 2.6
> > Recent CVS versions (as of July 2004) also have zaptel modules which
> > work with 2.6 kernels (type "make linux26" to compile them). The 2.6
> > version of the ztdummy module is completely different to the 2.4
> > version. Firstly it does not rely on the USB hardware being there;
> > instead it uses the PC hardware's clock (which under 2.6
> kernels can be
> > set to generate interrupts at the required precision), so
> it can be used
> > on any machine, rather than only those with the right USB hardware.
> > Effectively the 2.6 version of ztdummy does the same job as
> zaprtc does
> > for 2.4 kernels. I have been using ztdummy for 2.6 for a
> while now, and
> > have had no problems with it.
> >
> > To install, simply checkout zaptel from the Asterisk CVS and do the
> > following:
> >
> > - cd /usr/src/zaptel
> >
> > * READ /usr/src/zaptel/README.udev and follow the steps
> > * check modules on: /etc/sysconfig/zaptel> if you have no digium
> > hardware comment out all modeules except ztdummy.
> >
> > - make linux26
> > - modprobe zaptel
> > - modprobe ztdummy
> >
> > Cheers,
> > Guills
> >
> >
> > > -----Original Message-----
> > > From: Richard J. Sears [mailto:rsears at americanIS.net]
> > > Sent: Monday, February 14, 2005 1:16 PM
> > > To: asterisk-users at lists.digium.com
> > > Subject: [Asterisk-Users] ztdummy on Gentoo 2.6.10 Box
> > >
> > > Hi Everyone,
> > >
> > > I read through the list on the issues with the ztdummy driver
> > > which I need for MeetMe, but I seem to have come across a
> > > problem that I cannot seem to find an answer for.
> > >
> > > I am running Gentoo 2.6.10 on an Intel box.
> > >
> > > I have read the the wiki entries on the ztdummy and followed
> > > the instructions as they relate to the 2.6 kernel.
> > >
> > > Everything compiled great, but a modprobe ztdummy returned this:
> > >
> > > WARNING: Error inserting zaptel
> > > (/lib/modules/2.6.10-gentoo-r6/misc/zaptel.ko): Unknown
> > > symbol in module, or unknown parameter (see dmesg)
> > > WARNING: Error inserting zaptel
> > > (/lib/modules/2.6.10-gentoo-r6/misc/zaptel.ko): Unknown
> > > symbol in module, or unknown parameter (see dmesg)
> > > FATAL: Error inserting ztdummy
> > > (/lib/modules/2.6.10-gentoo-r6/misc/ztdummy.ko): Unknown
> > > symbol in module, or unknown parameter (see dmesg)
> > > FATAL: Error running install command for ztdummy
> > >
> > >
> > > Here is what my dmesg says:
> > >
> > > zaptel: Unknown symbol crc_ccitt_table
> > > zaptel: Unknown symbol crc_ccitt_table
> > > ztdummy: Unknown symbol zt_receive
> > > ztdummy: Unknown symbol zt_transmit
> > > ztdummy: Unknown symbol zt_unregister
> > > ztdummy: Unknown symbol zt_register
> > >
> > >
> > >
> > > I DO NOT have any Zaptel devices in my system and I VIed the
> > > makefile and uncommented the ztdummy as instructed.
> > >
> > >
> > > I guess my question is - what the heck is happeneing. Why is
> > > ztdummy trying to load zaptel which I do not have in my system..?
> > >
> > >
> > > Any help would be greatly appreciated.
> > >
> > >
> > > Thanks
> > >
> > >
> > >
> > > ******************************************
> > > Richard J. Sears
> > > Vice President
> > > American Internet Services
> > > ----------------------------------------------------
> > > rsears at adnc.com
> > > http://www.adnc.com
> > > ----------------------------------------------------
> > > 858.576.4272 - Phone
> > > 858.427.2401 - Fax
> > > INOC-DBA - 6130
> > > ----------------------------------------------------
> > >
> > > I fly because it releases my mind
> > > from the tyranny of petty things . .
> > >
> > >
> > > "Work like you don't need the money, love like you've
> > > never been hurt and dance like you do when nobody's
> > > watching."
> > >
> > > _______________________________________________
> > > Asterisk-Users mailing list
> > > Asterisk-Users at lists.digium.com
> > > http://lists.digium.com/mailman/listinfo/asterisk-users
> > > To UNSUBSCRIBE or update options visit:
> > > http://lists.digium.com/mailman/listinfo/asterisk-users
> > >
> > _______________________________________________
> > Asterisk-Users mailing list
> > Asterisk-Users at lists.digium.com
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> > To UNSUBSCRIBE or update options visit:
> > http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
> ******************************************
> Richard J. Sears
> Vice President
> American Internet Services
> ----------------------------------------------------
> rsears at adnc.com
> http://www.adnc.com
> ----------------------------------------------------
> 858.576.4272 - Phone
> 858.427.2401 - Fax
> INOC-DBA - 6130
> ----------------------------------------------------
>
> I fly because it releases my mind
> from the tyranny of petty things . .
>
>
> "Work like you don't need the money, love like you've
> never been hurt and dance like you do when nobody's
> watching."
>
>
More information about the asterisk-users
mailing list