[Asterisk-Users] Initializing two ISDN cards in isdn4linux

[Mark Elkins]

On Sat, 2005-02-12 at 12:20 +0000, JunkMail wrote:

> For the single card I was using with "isdntool" for initialization,
> wich
> works fine but has no support for two cards.
> 
> Can anyone tell me exactly how to initialize the ISDN system manually
> ???
> 
> It all starts with "modprobe -v hisax type=21,21" (loading hisax and
> telling
> it that we'll use two teles pci cards)
> and then ? what else ???

Not sure if this will help you - I ponce played with a mixture of single
port cards... Can't remember where I got the 'id=' bits from..

# For one eicon PCI
#modprobe hisax type=11

# For two eicon cards
modprobe hisax  type=11,11   id=201%202

# For Asuscom ISA
# isapnp /etc/isapnp.conf
#modprobe hisax  type=12 irq=3 io=0x0100


-- 
  .  .     ___. .__      Posix Systems - Sth Africa.  e.164 VOIP ready
 /| /|       / /__       mje at posix.co.za  -  Mark J Elkins, Cisco CCIE
/ |/ |ARK \_/ /__ LKINS  Tel: +27 12 807 0590  Cell: +27 82 601 0496