[Asterisk-Users] Strategy for a stable IAXy

John Novack jnovack at stromberg-carlson.org
Thu Feb 10 11:21:52 MST 2005


Why would someone choose these over other boxes, such as the Sipura 2000 
and 3000?

Also, anyone have experience with the TDM400 FXS module in a ground 
start configuration?
Digium has said , from two different support folks that they do not and 
do  work ground start.

John Novack


Colin Anderson wrote:

>I've heard comments about the instability of the IAXy (loosing IP, locking
>up, etc) . I want to deploy some, in a remote site. The comments on the
>instability suggest that the simplest approach is to power-cycle them when
>you have problems. The IAXy would only be in use from 3PM to 8 PM. My
>potential simple solution is to have a timed power brick (like what you
>would use for a block heater) that would cycle the power automatically at
>2:50 PM 
>
>Q1: Is this IAXy stability issue a problem, or not? Has it been addressed in
>firmware?
>
>Q2: If people are still having problems with their IAXy's, is automatically
>power cycling them the best approach, or is there a more elegant solution? 
>
>Q3: I've also heard they get hot. I'd like to hear experiences, good and
>bad, with IAXy's along the lines of: "Yeah, they get hot but they run fine"
>or: "Yeah, they get hot and crap out". 
>
>The environment they would be in is a little challenging, poor power and
>moderately high temperature extremes i.e. from 5 degrees C to 35 degrees C
>_______________________________________________
>Asterisk-Users mailing list
>Asterisk-Users at lists.digium.com
>http://lists.digium.com/mailman/listinfo/asterisk-users
>To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>
>
>  
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050210/51b112c4/attachment.htm


More information about the asterisk-users mailing list