[Asterisk-Users] (UPDATED) * not hanging up when call from POTS to IAX phone

[Robert Webb]

After doing some more checking, it seems I am having issues with the FXO
on the TDM400P recognizing what is happening on the POTS line. I had a
different issue with a soft phone and after running asterisk in a very
verbose mode, have discovered that * is only intermittently recognizing
that when dialing out on the POTS line that the called party is
answering. I intermittently get the “answered” response from the FXO
port and when I do the soft phone works correctly.

Seems to be the same issue with the hang up problem as it will only
intermittently recognize that the calling party on the POTS line has
hung up.

Guess I will need to do some more digging.

Thanks for the responses

Robert

________________________________________
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Robert
Webb
Sent: Wednesday, February 02, 2005 11:58 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: RE: [Asterisk-Users] * not hanging up when call from POTS to
IAX phone

Yes, it is enabled. But this not an issue with getting a busy signal. 

If a caller calls in from the POTS line and dials an extension number
that call an IAX client. During the time it is ringing if the caller
hangs up, the asterisk box does not detect this and continues through
the dial plan priorities. Then, in my case, voicemail answers and I get
a recording of a dial tone.

Robert


________________________________________
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Liaan vd
Merwe
Sent: Wednesday, February 02, 2005 11:41 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] * not hanging up when call from POTS to
IAX phone

Hi
Have you enabled detect busy?
----- Original Message ----- 
From: Robert Webb 
To: Asterisk Users Mailing List - Non-Commercial Discussion 
Sent: Wednesday, February 02, 2005 5:01 PM
Subject: [Asterisk-Users] * not hanging up when call from POTS to IAX
phone

I am having issues that when I call into my * box via a POTS line and
dial an extension that is located on an IAX softphone, if the caller
hangs up before going to voicemail the dialer continues through the plan
and dumps to voicemail. It then records a dialtone.

If I call in through the POTS and dial the extension that ties to a FXS
port, then everything works as it should. I am new at this and not sure
if there may be some setting I am missing.

Robert
________________________________________
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users