[Asterisk-Users] Driver not configuring correctly on TE210P forCCS

[Alex Barnes]

It was jumpers, thanks for the reply.

Sorry for the spam everyone.

It would be helpful to get a little quick start card with these cards to
save me a day of head aches but not to worry.

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Paul Liew
Sent: 28 December 2005 22:45
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] Driver not configuring correctly on TE210P
forCCS

Hi Alex,

Have you checked that your jumper setting on the card has been shorted
for E1. Its open by default to T1 - which overrides your zaptel.conf
settings.

Cheers,
Paul





Information contained in this e-mail and any attachments are intended for the use of the addressee only, and may contain confidential information of Ubiquity Software Corporation.  All unauthorized use, disclosure or distribution is strictly prohibited.  If you are not the addressee, please notify the sender immediately and destroy all copies of this email.  Unless otherwise expressly agreed in writing signed by an officer of Ubiquity Software Corporation, nothing in this communication shall be deemed to be legally binding.  Thank you.