[Asterisk-Users] uip200 phone not work with 1.2

[Jason Becker]

Jerry Geis wrote:
> Jason,
> 
> I added:
> 
> nat=never
> qualify=no
> 
> and I still cant get a UIP200 to ring when calling it after using 1.2?
> Any other suggestions?

Well, we're using UIP200's (BS 4.63 firmware) with 1.2. There is a bug 
(5780) re: rfc2833 & g729 in 1.2 tarball but that doesn't seem to be the 
case here.

Is the phone registering? "sip show peers"

If yes, turn on "sip debug" and look for clues. Also look in the 
Asterisk log file (set in logger.conf). i.e. /var/log/asterisk/full

Hope this helps.

Regards,

Jason


> 
> Thanks,
> 
> Jerry
> 
> Jerry Geis wrote:
> 
>> / I have a handful of phones that work with 1.0.9. I was trying to 
>> upgrade 
> 
> />/ to 1.2
> />/ and the UIP200 phones dont ring.
> />/ />/ below is my config for 1 phone.
> />/ />/ I tried it with and without the qualify=yes or qualify=no and 
> did not />/ seem to make
> />/ a difference. still no ring.
> />/ />/ Any ideas on what might be the issue?
> />/ />/ THanks,
> />/ />/ Jerry
> />/ --------
> />/ />/ ; Jerry Phone
> />/ [528]
> />/ type=friend
> />/ dtmfmode=rfc2833                ; Choices are inband, rfc2833, or info
> />/ username=something
> />/ secret=something
> />/ disallow=all
> />/ allow=ulaw
> />/ allow=alaw
> />/ host=dynamic
> />/ context=smvoice-sip
> />/ callerid="Jerry" <528>
> /
> Need to have:
> 
> nat=never (or nat=route)
> 
> Regards,
> 


-- 
Jason Becker
Director & CEO
Coalescent Systems Inc.
Enabling Open Source Telephony
403.244.8089
www.coalescentsystems.ca