[Asterisk-Users] Problem with a second incoming call on a BRIZapChannel

[David Masure]

Here are the versions :

Asterisk  1.0.6
Bristuff 0.2.0-RC7k
Kernel 2.4.20-8 on RedHat 9

I must also tell that I have 8 identical configurations running and I
have only one computer doing this problem...

I'm facing the problem when at least one of the two lines is already on
call

Best regards

David

Here comes more details from the command line interface :

Verbosity was 0 and is now 8
received TEI check request for TEI = 127
    -- Device 'POSTEDU02' successfuly registered
    -- Executing Answer("Zap/1-1", "") in new stack
    -- Accepting voice call from '359577352' to '6203' on channel 0/1,
span 1
    -- Executing SetVar("Zap/1-1",
"CALLFILENAME=DU-asterisk-2326-1133864928.0") in new stack
    -- Executing Monitor("Zap/1-1",
"wav|DU-asterisk-2326-1133864928.0|m") in new stack
    -- Executing Dial("Zap/1-1", "SIP/PosteDU01||rm") in new stack
    -- Called PosteDU01
    -- Started music on hold, class 'default', on Zap/1-1
    -- SIP/PosteDU01-85d1 is ringing
    -- SIP/PosteDU01-85d1 answered Zap/1-1
    -- Stopped music on hold on Zap/1-1
    -- Starting simple switch on '1002 at POSTEDU02'
    -- Executing SetVar("USTM/1002 at POSTEDU02-2",
"CALLFILENAME=DU-asterisk-2326-1133864955.2") in new stack
    -- Executing Monitor("USTM/1002 at POSTEDU02-2",
"wav|DU-asterisk-2326-1133864955.2|m") in new stack
    -- Executing Dial("USTM/1002 at POSTEDU02-2", "Zap/g1/0328242018") in
new stack
    -- Called g1/0328242018
  == Spawn extension (default, 6203, 4) exited non-zero on 'Zap/1-1'
    -- Hungup 'Zap/1-1'
monitor executing ( nice -n 19 soxmix
"/var/spool/asterisk/monitor/DU-asterisk-2326-1133864928.0-in.wav"
"/var/spool/asteris
k/monitor/DU-asterisk-2326-1133864928.0-out.wav"
"/var/spool/asterisk/monitor/DU-asterisk-2326-1133864928.0.wav"  && rm
-f "
/var/spool/asterisk/monitor"/DU-asterisk-2326-1133864928.0-* ) &
    -- Zap/2-1 answered USTM/1002 at POSTEDU02-2
    -- Executing SetVar("SIP/PosteDU01-409e",
"CALLFILENAME=DU-asterisk-2326-1133864969.4") in new stack
    -- Executing Monitor("SIP/PosteDU01-409e",
"wav|DU-asterisk-2326-1133864969.4|m") in new stack
    -- Executing Dial("SIP/PosteDU01-409e", "Zap/g1/0663482134") in new
stack
    -- Called g1/0663482134
    -- Zap/1-1 is ringing
    -- Zap/1-1 answered SIP/PosteDU01-409e
    -- Ignoring callwaiting SETUP on channel 0/0 span 1 0
Dec  6 11:30:30 WARNING[2327]: chan_zap.c:7512 zt_pri_error: PRI:
received SETUP message for call that is not a new call, wi
cked!!!
    -- Hungup 'Zap/1-1'
  == Spawn extension (default, 00663482134, 3) exited non-zero on
'SIP/PosteDU01-409e'
monitor executing ( nice -n 19 soxmix
"/var/spool/asterisk/monitor/DU-asterisk-2326-1133864969.4-in.wav"
"/var/spool/asteris
k/monitor/DU-asterisk-2326-1133864969.4-out.wav"
"/var/spool/asterisk/monitor/DU-asterisk-2326-1133864969.4.wav"  && rm
-f "
/var/spool/asterisk/monitor"/DU-asterisk-2326-1133864969.4-* ) &
    -- Hungup 'Zap/2-1'
  == Spawn extension (default, 00328242018, 3) exited non-zero on
'USTM/1002 at POSTEDU02-2'
monitor executing ( nice -n 19 soxmix
"/var/spool/asterisk/monitor/DU-asterisk-2326-1133864955.2-in.wav"
"/var/spool/asteris
k/monitor/DU-asterisk-2326-1133864955.2-out.wav"
"/var/spool/asterisk/monitor/DU-asterisk-2326-1133864955.2.wav"  && rm
-f "
/var/spool/asterisk/monitor"/DU-asterisk-2326-1133864955.2-* ) &
  == Primary D-Channel on span 1 down
  == Primary D-Channel on span 1 up


-----Message d'origine-----
De : Tzafrir Cohen [mailto:tzafrir at cohens.org.il]
Envoyé : mardi 6 décembre 2005 11:07
À : asterisk-users at lists.digium.com
Objet : Re: [Asterisk-Users] Problem with a second incoming call on a
BRIZapChannel


On Tue, Dec 06, 2005 at 10:42:11AM +0100, David Masure wrote:
> ************
> Second Post !!!  Please help !
> ************
>  
> Hi,
>  
> I'm using Asterisk with a BRI Card (HFC Chipset) using the zaphfc
> driver.
>  

What versions of asterisk, bristuff, kernel and linux?

> I'm encountering the following problem : when the first line is in use
> and a second incoming call arrive, the console shows the following
> message : 
>  
> Dec  5 14:40:52 WARNING[2323]: chan_zap.c:7512 zt_pri_error: PRI:
> received SETUP message for call that is not a new call, wicked!!!

Could you provide some more context? set verbose 5 and provide some
lines from the CLI around that message.

>  
> Does anyone have an idea of what this is ???  FYI : the Asterisk is
> located in France (so France Telecom as carrier)
>  
> The worst is that it doesn't do it all the time....  Any help will be
> welcome....

Any ideas how to reproduce the problem?

-- 
Tzafrir Cohen         | tzafrir at jbr.cohens.org.il | VIM is
http://tzafrir.org.il |                           | a Mutt's  
tzafrir at cohens.org.il |                           |  best
ICQ# 16849755         |                           | friend
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users