[Asterisk-Users] fedora core 3 kernel source - couldsomeonethrowthe dog a bone!

[Lee Archer]

The issue I have had with all other FC3 kernels apart from the 2.6.9 one
was that the zaptel build would throw lots of warnings up.  This would
have the knock on of hanging the system, spinlock I think the problem
was, on a modprobe -r.
 
Lee

________________________________

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Damon
Estep
Sent: 26 August 2005 17:46
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: RE: [Asterisk-Users] fedora core 3 kernel source -
couldsomeonethrowthe dog a bone!



What was the issue with zaptel and 2.6.12?

 

________________________________

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Lee Archer
Sent: Thursday, August 25, 2005 1:22 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: RE: [Asterisk-Users] fedora core 3 kernel source - could
someonethrowthe dog a bone!

 

I found that only the kernel is installed.  I'd avoid 2.6.12 for now as
I had problem with the zaptel driver and stay with 2.6.9.

 

Regards

 

Lee

 

________________________________

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Damon
Estep
Sent: 24 August 2005 22:33
To: asterisk-users at lists.digium.com
Subject: [Asterisk-Users] fedora core 3 kernel source - could someone
throwthe dog a bone!

This could be a duplicate post, sent it originally 4 hours ago, it never
showed up!

 

I know this is a question with an obvious answer to some, but I am not
one of them.

 

Installed FC3, but this time I decide to update since my ISOs are a bit
old, so typical yum update

 

Downloaded the FC3 SRPM for my kernel 2.6.12...

 

Installed the SRPM package

 

Ran rpmbuild -bp -target=i686 kernel-2.6.spec

 

Tried to build zaptel

-         error; You do not appear to have the sources for the
2.6.12-1.1372_FC3smp kernel installed.

 

So I assume that either a) I did not build the correct source for the
smp kernel, or b) I am missing a symbolic link to the kernel source.

 

No help from the FC3 release notes, no help from a Google.

 

So, if you don't mind, throw me the bone...

###########################################

This message has been scanned by F-Secure Anti-Virus for Microsoft
Exchange.
For more information, connect to http://www.f-secure.com/

###########################################

This message has been scanned by F-Secure Anti-Virus for Microsoft Exchange.
For more information, connect to http://www.f-secure.com/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050830/c93cddc0/attachment.htm