[Asterisk-Users] Variuos hangup codes in Manager API for failover

[Steve Edwards]

> Normally the way I do it is to program the failover into the dialplan and then
> send the call to Local/exten at context to initiate it.

How about a snippet? (Local channels somewhat escape me.)

On Mon, 29 Aug 2005, Matt Riddell wrote:

> Geoff Karl wrote:
>> I am currently using the Manager API to place a few calls. I have more than
>> one VSP available.
>>
>> I was wondering how to best tell a call failed to move on to the next VSP.
>>
>> I see messages like this, which is an obvious failure, and I would then move
>> on to the next VSP.
>
> Normally the way I do it is to program the failover into the dialplan and then
> send the call to Local/exten at context to initiate it.
>
> That way if you roll the software out to clients (who may have 1 or 100 or 100
> providers set up) then they will not need to make alterations.
>
> BTW: Rather than checking for all of the possible failures that could occur
> why not just check for a success or lack thereof.
>
> -- 
> Cheers,
>
> Matt Riddell
> _______________________________________________
>
> http://www.sineapps.com/news.php (Daily Asterisk News - html)
> http://www.sineapps.com/rssfeed.php (Daily Asterisk News - rss)
> _______________________________________________
> --Bandwidth and Colocation sponsored by Easynews.com --
>
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>

Thanks in advance,
------------------------------------------------------------------------
Steve Edwards      sedwards at sedwards.com      Voice: +1-760-468-3867 PST
Newline           pagesteve at sedwards.com            Fax: +1-760-731-3000