[Asterisk-Users] PRI signaling experts please help

[Eric Bishop]

Already am using this option.....


On 8/25/05, Jens von Bülow <jens at nha.co.za> wrote:
> Hi Eric,
> 
> Don't you need to use out-of-band PRI signaling...
> 
> From /etc/asterisk/zapata.conf
> <snip>
> ; PRI Out of band indications.
> ; Enable this to report Busy and Congestion on a PRI using out-of-band
> ; notification. Inband indication, as used by Asterisk doesn't seem to work
> ; with all telcos.
> ;
> ; outofband:      Signal Busy/Congestion out of band with RELEASE/DISCONNECT
> ; inband:         Signal Busy/Congestion using in-band tones
> priindication = outofband
> </snip>
> 
> Hope that Helps
> Jens
> 
> 
> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Eric Bishop
> Sent: 25 August 2005 09:32 AM
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: [Asterisk-Users] PRI signaling experts please help
> 
> Hi all,
> 
> Our Asterisk box sends calls outbound via either SIP (through our VoIP
> provider) or an E1 PRI (directly connected via a TE410P). When we dial
> a number that is engaged via our VoIP provider we get the following on
> the Asterisk console (numbers and IP addresses changed to protect the
> innocent):
> 
>   -- Called 12345678 at sip-outbound
>    -- Got SIP response 486 "Busy here" back from 123.123.123.123
>    -- SIP/sip-outbound-af71 is busy
>  == Everyone is busy/congested at this time
> 
> This is what we want as it then send the call to priority n+101 and we
> can handle it any way we want from there. However if the outbound call
> is made via the PRI (Zap channel) to an enaged number it simply plays an enaged
> signal to the caller and never progresses to priority n+101.
> 
> Anyone have any suggestions?
> _______________________________________________
> --Bandwidth and Colocation sponsored by Easynews.com --
> 
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>