[Asterisk-Users] Module wcfxs - is it not part of astlinux?

[Angus Comber]

I am running astlinux 0.2.8 - ie latest latest version.

OK so wctdm is alias to same as wcfxs.  But even if I load that, it loads OK

pbx sbin # lsmod
Module                  Size  Used by
binfmt_misc 12296 1 - Live 0xde839000
wctdm 129216 0 - Live 0xde855000
zaptel 235844 1 wctdm, Live 0xde877000
hdlc 24576 1 zaptel, Live 0xde84e000
syncppp 17116 1 hdlc, Live 0xde848000
ppp_generic 30612 1 zaptel, Live 0xde83f000
slhc 7808 1 ppp_generic, Live 0xde829000
crc_ccitt 2432 1 zaptel, Live 0xde806000
via_rhine 21252 0 - Live 0xde82d000
mii 5120 1 via_rhine, Live 0xde81d000
crc32 4608 1 via_rhine, Live 0xde81a000
rtc 12748 0 - Live 0xde820000
pbx sbin #

But don't see it with a cat /proc/interrupts (I have disabled all unused 
devices in BIOS).

pbx sbin # cat /proc/interrupts
           CPU0
  0:    1348003          XT-PIC  timer
  1:          8          XT-PIC  i8042
  2:          0          XT-PIC  cascade
  5:          0          XT-PIC  uhci_hcd
  8:          0          XT-PIC  rtc
  9:          0          XT-PIC  acpi
 10:          0          XT-PIC  uhci_hcd
 11:       1226          XT-PIC  uhci_hcd, eth0
 12:          0          XT-PIC  ehci_hcd
 14:      13563          XT-PIC  ide0
 15:         71          XT-PIC  ide1
NMI:          0
LOC:          0
ERR:          0
MIS:          0
pbx sbin #

And still can't load Asterisk and ztcfg gives me

pbx sbin # ztcfg -vvvvv

Zaptel Configuration
======================


Channel map:

Channel 01: FXS Kewlstart (Default) (Slaves: 01)
Channel 02: FXS Kewlstart (Default) (Slaves: 02)
Channel 03: FXS Kewlstart (Default) (Slaves: 03)
Channel 04: FXS Kewlstart (Default) (Slaves: 04)

4 channels configured.

ZT_CHANCONFIG failed on channel 1: No such device or address (6)

The card was working fine in other PC - so I have to assume it is some 
config issue.

Angus






----- Original Message ----- 
From: "Tzafrir Cohen" <tzafrir at cohens.org.il>
To: <asterisk-users at lists.digium.com>
Sent: Sunday, August 14, 2005 11:45 AM
Subject: Re: [Asterisk-Users] Module wcfxs - is it not part of astlinux?


> On Sun, Aug 14, 2005 at 11:37:00AM +0100, Angus Comber wrote:
>> Hello
>>
>> I am (attempting) to run the astlinux version
>
> Which version?
>
>>of Asterisk on a VIA embedded
>> platform.  I have a TDM04B and pretty sure zaptel.conf and zapata.conf
>> setup OK.  They worked fine with same card in traditional PC anyway.
>>
>> I think need the module wcfxs for a Digium TDM04B card.  Is this module 
>> not
>> part
>> of astlinux?  Do I need to download it?  Or is it in opt?  I see wctdm - 
>> but
>> think that is for X100 card.
>
> X100*P* uses wcfxo . IIRC in 1.0 TDM04B still uses wcfxs and wcfxo,
> depending on the module, but maybe just wcfxs. In later 1.0 zaptels,
> wctdm is an alias to wcfxs. In HEAD/1.2 wcfxs is gone and replaced with
> wctdm.
>
> -- 
> Tzafrir Cohen         | tzafrir at jbr.cohens.org.il | VIM is
> http://tzafrir.org.il |                           | a Mutt's
> tzafrir at cohens.org.il |                           |  best
> ICQ# 16849755         |                           | friend
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>