[Asterisk-Users] TDM400P Card (Rev G) with bad FXS module?

[Orlando Guitián]

Jeff:

Which operating system are you running?

>From: Jeff Borders <jeff at jeffborders.com>
>Reply-To: Asterisk Users Mailing List - Non-Commercial 
>Discussion<asterisk-users at lists.digium.com>
>To: "asterisk-users at lists.digium.com" <asterisk-users at lists.digium.com>
>Subject: [Asterisk-Users] TDM400P Card (Rev G) with bad FXS module?
>Date: Sat, 13 Aug 2005 10:46:20 -0400
>
>I think I have a bad FXS module on my TDM400P.
>
>Channel map:
> >>
> >> Channel 01: FXO Kewlstart (Default) (Slaves: 01)
> >> Channel 02: FXS Kewlstart (Default) (Slaves: 02)
> >>
> >> 2 channels configured.
> >> ZT_CHANCONFIG failed on channel 1: No such device or address (6)
>
>The zaptel loads ok, but the wctdm reports No such device or address and 
>stays loaded.  The TDM400P is rev G if that means anything.  When I do a  
>ls -l /proc/zaptel/* there's nothing there.
>
>I'm pretty sure my configs are correct.  I copied them verbatim from 
>http://www.asteriskguru.com/tutorials/wildcard_tdm400p.html and my card is 
>setup the same way with the green FXS Module in TEL1 and the red FXO module 
>in TEL2.  (I believe thats the standard way they come from Digium.)  I 
>purchased this probably two years ago.
>
>I've tried both the stable zaptel and CVS zaptel.  I tried moving the 
>modules to 3 and 4 (and changed everything accordingly).  I even tried 
>this:
>
>Comment out this line on zaptel/zconfig.h and recompile zaptel.
>
>/*
>   * Uncomment if you happen have an early TDM400P Rev H which
>   * sometimes forgets its PCI ID to have wcfxs match essentially all
>   * subvendor ID's
>   */
>/* #define TDM_REVH_MATCHALL */
>
>This is just a basic test setup for my home.  I want to get an analog phone 
>and 2 Cisco 7910 phones working.  Any help would be appreciated.
>Jeff Borders
>_______________________________________________
>Asterisk-Users mailing list
>Asterisk-Users at lists.digium.com
>http://lists.digium.com/mailman/listinfo/asterisk-users
>To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users