[Asterisk-Users] Possibly bad FXS module in TDM400P?

Jeff Borders jeff at jeffborders.com
Fri Aug 12 05:46:45 MST 2005


I've got the latest zaptel and cvs asterisk software loaded on my phone 
server running FC3.  And yes, It's fully updated and udev is setup 
correctly.  I've got a TDM400P with one FXS and one FXO module 
installed.  When I load zaptel and wctdm and run ztcfg -vvv, I get this:

[root at asterisk ~]# ztcfg -vvv
ZT_CHANCONFIG failed on channel 1: No such device or address (6)

Zaptel Configuration
======================


Channel map:

Channel 01: FXO Kewlstart (Default) (Slaves: 01)
Channel 02: FXS Kewlstart (Default) (Slaves: 02)

2 channels configured.

Regardless of my configuration, it should show up in ztcfg, right? 
Here's my:

****** zaptel.conf ********

loadzone = us
defaultzone = us
fxoks=1
fxsks=2

****** zapata.conf ********
[trunkgroups]
[channels]
language=en
context=default
switchtype=national
signalling=fxo_ks
rxwink=300              ; Atlas seems to use long (250ms) winks
usecallerid=yes
hidecallerid=no
callwaiting=no
usecallingpres=yes
callwaitingcallerid=no
threewaycalling=no
transfer=yes
canpark=yes
cancallforward=yes
callreturn=yes
mailbox=2500
echocancel=yes
echocancelwhenbridged=yes
rxgain=0.0
txgain=0.0
group=1
callgroup=1
pickupgroup=1
immediate=no
context=default
channel => 1
context=incoming
signalling=fxs_ks
group=2
channel => 2

Thanks for your help.

Jeff Borders



More information about the asterisk-users mailing list