[Asterisk-Users] Cisco ATA and a PayPhone

[Mark Johnson]

Andres wrote:

>>> Help is on the way:)
>>>
>>> This is quite simple to achieve on Sipura units.  There is a 
>>> parameter called
>>>
>>> Dial Tone:   350 at -19,440 at -19;10(*/0/1+2)
>>>
>>> It defines the frequencies and duration of the tone.  The "10" you 
>>> see near the end is the duration.  Simply change it to 60 like this 
>>> and you're done:
>>>
>>> Dial Tone:   350 at -19,440 at -19;60(*/0/1+2)
>>>
>>> I just tried it and it works like you want it.
>>>   
>>
>>
>> I'm not the OP and do plan on deploying several spa3k's, is there
>> somewhere this kind of stuff is documented for the spa's?
>>
>>
>>  
>>
> The Sipura Admin guide covers also the spa3k.  The Dial Tone parameter 
> is the same for all SPAs.  You can ask your reseller for the Admin 
> guide if you don't have it.
>
> Cheers.
>
These are great suggestions!!  I will try them on Monday!

Mark