[Asterisk-Users] Problem with Sangoma/Adtran 600 installation

[Chris Mason (Lists)]

I have installed Asterisk on a CentOS4 box and then installed Asterisk from
CVS.
I installed a Sangoma A101 and connected it to a Adtran 600 using a T1
Crossover cable. The 600 has 12 x FXS, 12 x FXO interfaces.

I ran through the wanpipe install instructions and configured it, now I can
run 

[root at altpbx asterisk]#  wanrouter hwprobe

-------------------------------
| Wanpipe Hardware Probe Info |
-------------------------------
1 . AFT-A101u  : SLOT=1 : BUS=1 : IRQ=209 : CPU=A : PORT=PRI

Card Cnt: S508=0  S514X=0  S518=0  A101-2=1  A104=0  A300=0 

So I know the card is there OK.

My /etc/zaptel.conf looks like:
span=1,1,0,esf,b8zs
loadzone = us
defaultzone=us
fxsls=1-12

I am only trying to get half to load for now to make it simple.

[root at altpbx asterisk]# ztcfg
Notice: Configuration file is /etc/zaptel.conf
line 0: Unable to open master device '/dev/zap/ctl'

1 error(s) detected

When I run "service zaptel restart" I get:

Waiting for zap to come online...Error: missing /dev/zap!

Wha am I doing wrong?


Chris Mason
NetConcepts
(264) 497-5670 Fax: (264) 497-8463
Int:  (646)722-0001 Fax: (815)301-9759 
(305) 704-7249
Yahoo IM: netconcepts_anguilla at yahoo.com 
Skype ID: netconcepts