[Asterisk-Users] Can't get incoming calls with IAX trunks (FWD &Teliax)

[Henry Devito]

>From the CLI if you do a iax2 show registry, does it show you registered? 
Maybe you can post the parts of your config that pertains to your question?

----- Original Message ----- 
From: "Patrick Gray, Jr." <patgrayjr at yahoo.com>
To: <asterisk-users at lists.digium.com>
Sent: Friday, April 29, 2005 11:03 PM
Subject: [Asterisk-Users] Can't get incoming calls with IAX trunks (FWD 
&Teliax)


>I have Asterisk at Home 0.9 running, and everything seems
> to work well EXCEPT incoming calls.
>
> I have an FWD and Teliax trunk (both using IAX), and a
> Cisco 7960 SIP phone connected to Asterisk.
> Everything tests fine:
>
> - Can call from softphone to Cisco and vice versa
> - Asterisk inbound simulation works like a champ
> - Voicemail works fine
> - Outbound calls to both trunks works fine
>
> However, when I call into my system on the FWD or
> Teliax trunks, nothing happens.  Nothing appears on
> the asterisk console so I'm not even sure where to
> start.  I'm suspecting network problems, but don't
> know what to look for.  My asterisk box sits on my
> LAN, behind an IPCop-based NAT router.  I've forwarded
> port 4569 UDP and TCP to the asterisk box, but still
> no joy.  I've googled and checked voip-info, but
> everything that mentions NAT as a potential problem
> points to IAX as the solution.  Trunk-wise, I'm pure
> IAX (only SIP is the 7960, and it's on the same
> network as the asterisk box).
>
> I'm pretty new to asterisk, so if you can dumb down
> any debugging advice I'd appreciate it.
>
> Thanks a ton!
>
> Pat
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users